OSHA SearchOSHA records by employer

Azteca Fabrication: OSHA inspections and violations

Carlsbad, New Mexico · Welding and Soldering Equipment Manufacturing · NAICS 333992

1inspections
3citation items
$9,680current penalties
Sep 1, 2017last inspection

Azteca Fabrication has one OSHA inspection on record in New Mexico.

OSHA opened it on Sep 1, 2017 after a fatality or catastrophe, in Carlsbad.

From that inspection OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

OSHA proposed $12,100 in penalties. After settlements and reviews the total is $9,680, down 20%.

Most often, OSHA cited 1926.152, flammable liquids (2 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Azteca Fabrication averages $9,680 over 1 cited inspection in that time.

1 inspection on this page followed a fatal incident.

Azteca Fabrication: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

New Mexico · latest 90 days of OSHA records

35employers cited

Get notified the morning OSHA posts each new citation in New Mexico: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Mexico

Checking a subcontractor, a client or your own company? Watch Azteca Fabrication and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342611399 OPENED SEP 1, 2017Closed

Fatality or catastrophe · Partial · Safety · 30 employees at the site · Closed Jun 14, 2018

Forehand Ranch 22 State #8h And #9h, Carlsbad, NM 88220 · Welding and Soldering Equipment Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Sep 1, 2017 (fatal): Three employees are killed when oil tank explodes

At 10:45 a.m. on September 1, 2017, three workers were sent to inspect and possibly repair a weld on a metal tank used to hold crude oil. The oil had been removed from the tank two days prior but had not been cleaned. Two of the workers were preparing to repair the weld using an arc welder. The exact cause of the explosion is unknown but it is likely that the arc from the welder ignited the crude oil vapor still in the tank. All three workers were completely burned and killed in the explosion.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.152(i)(6) · Flammable liquids
Serious$6,000$4,800Feb 28, 2018Final
Citation 1, item 2
29 CFR 1926.152(i)(7)(i) · Flammable liquids
Serious$6,000$4,800Feb 28, 2018Final
Citation 2, item 1
29 CFR 1904.40(a) · Giving injury records to OSHA
Other-than-serious$100$80Feb 28, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.40 · Giving injury records to OSHA

29 CFR 1904.40(a)

(a) Basic requirement. When an authorized government representative asks for the records you keep under part 1904, you must provide copies of the records within four (4) business hours.

29 CFR 1926.152 · Flammable liquids

29 CFR 1926.152(i)(6)

(6) Sources of ignition. In locations where flammable vapors may be present, precautions shall be taken to prevent ignition by eliminating or controlling sources of ignition. Sources of ignition may include open flames, lightning, smoking, cutting and welding, hot surfaces, frictional heat, sparks (static, electrical, and mechanical), spontaneous ignition, chemical and physical-chemical reactions, and radiant heat.

29 CFR 1926.152(i)(7)(i)

(7) Testing—(i) General. All tanks, whether shop built or field erected, shall be strength tested before they are placed in service in accordance with the applicable paragraphs of the code under which they were built. The American Society of Mechanical Engineers (ASME) code stamp, American Petroleum Institute (API) monogram, or the label of the Underwriters' Laboratories, Inc., on a tank shall be evidence of compliance with this strength test. Tanks not marked in accordance with the above codes shall be strength tested before they are placed in service in accordance with good engineering principles and reference shall be made to the sections on testing in the codes listed in paragraphs (i)(1) (iii)(A), (iv)(B), or (v)(B) of this section.

Other welding and soldering equipment manufacturing employers in New Mexico

Alert subscribers get notified of each newly cited employer in New Mexico the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.