Badger Corrugating Company: OSHA inspections and violations
La Crosse, Wisconsin · Wood Window and Door Manufacturing · NAICS 321911
4inspections
19citation items
$2,668current penalties
Feb 15, 2023last inspection
Badger Corrugating Company has 4 OSHA inspections on record in Wisconsin, the first in 1974.
OSHA's last visit started on Feb 15, 2023 after a complaint, in La Crosse.
Across those inspections OSHA issued 19 citation items: 4 serious and 15 other-than-serious.
OSHA proposed $3,740 in penalties. After settlements and reviews the total is $2,668, down 29%.
Most often, OSHA cited 1910.107, spray painting and finishing (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Badger Corrugating Company averages $0 over 1 cited inspection in that time.
Badger Corrugating Company also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
228employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Badger Corrugating Company and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the La Crosse site logged 13 recordable injuries or illnesses among about 200 workers: 8.2 per 100 full-time workers, against a median of 3.5 for its industry. Those cases cost 78 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Badger Corrugating Company
La Crosse · 2025
200
13
8
8.2
3.5
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
29 CFR 1910.107(d)(2)
(2) General. All spraying areas shall be provided with mechanical ventilation adequate to remove flammable vapors, mists, or powders to a safe location and to confine and control combustible residues so that life is not endangered. Mechanical ventilation shall be kept in operation at all times while spraying operations are being conducted and for a sufficient time thereafter to allow vapors from drying coated articles and drying finishing material residue to be exhausted.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.