OSHA SearchOSHA records by employer

BCH Trucking: OSHA inspections and violations

Carlsbad, New Mexico · Support Activities for Oil and Gas Operations · NAICS 213112

1inspections
6citation items
$9,150current penalties
Feb 12, 2015last inspection

OSHA inspectors have visited BCH Trucking in New Mexico one time.

It opened on Feb 12, 2015 after a fatality or catastrophe, in Carlsbad.

In all, OSHA issued 6 citation items: 5 serious and 1 other-than-serious.

The penalties, $9,150 in total, stand where OSHA first set them.

The rule cited most here is 1910.147 (lockout/tagout), 4 times.

Among mining and oil and gas employers, the typical cited inspection since 2015 ends with a $2,886 penalty. BCH Trucking averages $9,150 across 1 cited inspection.

1 inspection on this page followed a fatal incident.

BCH Trucking: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

New Mexico · latest 90 days of OSHA records

31employers cited

6 of them in the same industry

Get notified the morning OSHA posts each new citation in New Mexico: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Mexico

Checking a subcontractor, a client or your own company? Watch BCH Trucking and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340415132 OPENED FEB 12, 2015Closed

Fatality or catastrophe · Complete · Safety · 1 employee at the site · Closed Aug 29, 2019

Big Sinks A 1p Mewbourne Oil Co. 465 Fnl & 330 Fel Sec. 12, Tns 26s Range 31e, Carlsbad, NM 88220 · Support Activities for Oil and Gas Operations · OSHA's record · Phone and website on Google Maps

Incident on Jan 30, 2015 (fatal): Employee killed when caught in pto drive shaft of pump truck

At 11:00 a.m. on January 30, 2012, and employee was performing mechanical work with a crescent wrench. The employee got his shirt/coat sleave caught on turning PTO drive shaft. The employee was killed from contact with turning PTO drive shaft.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1904.39(a)(1) · Reporting deaths and severe injuries
Serious$450$450Jul 30, 2015Final
Citation 1, item 2
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$2,100$2,100Jul 30, 2015Final
Citation 1, item 3
29 CFR 1910.147(d)(2) · Lockout/tagout
Serious$2,100$2,100Jul 30, 2015Final
Citation 1, item 4
29 CFR 1910.147(d)(3) · Lockout/tagout
Serious$2,100$2,100Jul 30, 2015Final
Citation 1, item 5
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,100$2,100Jul 30, 2015Final
Citation 2, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Other-than-serious$300$300Jul 30, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(1)

(a) Basic requirement. (1) Within eight (8) hours after the death of any employee as a result of a work-related incident, you must report the fatality to the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.147(c)(7)(i)

(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:

29 CFR 1910.212 · Machine guarding

Other support activities for oil and gas operations employers in New Mexico

Alert subscribers get notified of each newly cited employer in New Mexico the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.