Aztec Well Servicing: OSHA inspections and violations
Aztec, New Mexico · Drilling Oil and Gas Wells · NAICS 213111
16inspections
33citation items
$98,688current penalties
Mar 26, 2026last inspection
Aztec Well Servicing has 16 OSHA inspections on record in New Mexico, the first in 1976.
OSHA's last visit started on Mar 26, 2026 as a planned inspection, in Navajo Dam, and the case has not closed yet.
Across those inspections OSHA issued 33 citation items: 16 serious and 17 other-than-serious.
OSHA proposed $118,526 in penalties. After settlements and reviews the total is $98,688, down 17%.
Most often, OSHA cited Section 5(a)(1), the General Duty Clause (4 items).
For context, across all mining and oil and gas employers the median penalty per cited inspection since 2015 is $2,883. Aztec Well Servicing averages $21,976 over 4 cited inspections in that time.
3 inspections on this page followed a fatal incident.
Aztec Well Servicing also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
New Mexico · latest 90 days of OSHA records
35employers cited
3 of them in the same industry
Get notified the morning OSHA posts each new citation in New Mexico: the employer, the site address, the rules broken and the penalty.
OSHA records show Aztec Well Servicing at 8 sites in 2 states. Together they've had 17 inspections and $104,688 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 8 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Oct 7, 2003 (fatal): Employee amputates finger
At approximately 11:00 p.m. On October 7, 2003, Employee #1 was working at a loc ation with a morning crew. The crew from the previous evening had added a pipe s ection to a drill string. As the morning crew waited for the drill down of the a dded length of drill string, they initiated a walk-down of the rig. Employee #1 was on the catwalk located near the torque converters, and it was extended to th e cathead. The shaft of the cathead extended about 1.5 ft horizontally into the catwalk space approximately shoulder level of 4 ft. As Employee #1 approached th is area, he was caught in the rotating spindle of the cathead. It dismembered hi s right arm. Employee #1 was transported to a hospital, where he later died of h is injuries.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 90005 A
Serious
$4,500
$1,200
Mar 16, 2004
Final
Inspection 305241978 OPENED SEP 15, 2003Closed
Accident · Partial · Safety · 300 employees at the site · Closed Jul 29, 2004
Incident on Sep 7, 2003 (fatal): Employee killed by natural gas ignition
On September 7, 2003, Employee #1 was standing on the rig floor. The employee wa s burned when natural gas ignited during a surge operation on the drilling rig. Employee #1 was killed.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 2
29 CFR 90005 A
Serious
$6,300
$3,000
Feb 5, 2004
Final
Inspection 14963888 OPENED OCT 31, 1984Closed
Accident · Complete · Safety · 17 employees at the site · Closed Oct 1, 2000
Incident on Oct 29, 1984 (fatal): Struck by swinging drill collar
THE DRILL CREW HAD BEEN REMOVING THE DRILL STRING FROM AN OIL AND GAS WELL PRIOR TO RUNNING CASING. THE CREW WAS REMOVING THE DRILL COLLARS A UNIT AT A TIME. TH E COLLAR WAS SUSPENDED FROM THE ELEVATORS, AND THE FREE END WAS ATTACHED BY A SL IP LINE THAT WAS CONNECTED TO A PNEWMATIC WINCH. THE FREE END HAD BEEN PULLED TO THE V-DOOR WHEN THE SLIP LINE CAME LOOSE FROM THE HOOK. THE COLLAR SWUNG BACK T OWARDS THE ROTARY TABLE AND STRUCK EMPLOYEE #1 IN THE BACK OF THE HEAD AND SHOUL DER. THE EMPLOYEE HAD BEEN WARNED NOT TO STAND NEAR THE ROTARY TABLE UNTIL THE E ND OF THE COLLAR HAD BEEN LOWERED BELOW THE FLOOR LEVEL AND OUT THE V-DOOR.
Incident on Jul 3, 1984: Ten employees burned in gas well fire
Employees #1 through #10 were preparing to install a liner handler on the produc tion string of a natural gas well. The stripping rubber was removed from the blo wout protector prior to installing the hanger. One employee lit a cigarette, sta rting a fire. Employees #1 through #10 sustained burns and were hospitalized. Th e blowout protector could not be closed because it had 3 1/2 in. rams in it and 4 1/2 in. casing through it.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 5000095A01
Serious
$420
$420
Dec 31, 1984
Contested
Citation 1, item 2
29 CFR 5000095A01
Serious
$420
$420
Dec 31, 1984
Contested
Inspection 16121675 OPENED AUG 31, 1976Closed
Follow-up · Partial · Safety · 12 employees at the site · Closed Mar 10, 1984
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Aztec site logged 5 recordable injuries or illnesses among about 137 workers: 2.7 per 100 full-time workers, against a median of 0.2 for its industry. Those cases cost 65 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Aztec Well Servicing Co.
Aztec · 2025
137
5
1
2.7
0.2
Included with any plan: 7 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1903.2 · Posting of notice; availability of the Act, regulations and applicable standards
29 CFR 1903.2(a)(1)
(a)(1) Each employer shall post and keep posted a notice or notices, to be furnished by the Occupational Safety and Health Administration, U.S. Department of Labor, informing employees of the protections and obligations provided for in the Act, and that for assistance and information, including copies of the Act and of specific safety and health standards, employees should contact the employer or the nearest office of the Department of Labor. Such notice or notices shall be posted by the employer in each establishment in a conspicuous place or places where notices to employees are customarily posted. Each employer shall take steps to insure that such notices are not altered, defaced, or covered by other material.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(18) Personal fall protection systems must be inspected before initial use during each workshift for mildew, wear, damage, and other deterioration, and defective components must be removed from service.
Alert subscribers get notified of each newly cited employer in New Mexico the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.