Biesanz Stone Company: OSHA inspections and violations
Winona, Minnesota · Cut Stone and Stone Product Manufacturing · NAICS 327991
7inspections
22citation items
$8,175current penalties
Jun 28, 2017last inspection
Since 1983, OSHA inspectors have visited Biesanz Stone Company in Minnesota 7 times.
The most recent inspection opened on Jun 28, 2017 as a planned inspection, in Winona.
In all, OSHA issued 22 citation items: 17 serious and 5 other-than-serious.
The proposed penalties came to $9,150; today they stand at $8,175, 11% less.
The rule cited most here is 1910.179 (overhead and gantry cranes), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Biesanz Stone Company averages $600 across 1 cited inspection.
Biesanz Stone Company also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
373employers cited
7 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Winona site logged 0 recordable injuries or illnesses among about 12 workers: 0.0 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Biesanz Stone Company
Winona · 2022
12
0
0
0.0
2.6
Included with any plan: 1 more yearly log from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.
(c) Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.