Northport, Alabama · Other Motor Vehicle Parts Manufacturing · NAICS 336390
2inspections
2citation items
$9,964current penalties
Aug 25, 2017last inspection
Since 2016, OSHA inspectors have visited Bolta US, Inc. in Alabama 2 times.
The most recent inspection opened on Aug 25, 2017 after a complaint, in Northport.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $15,580; today they stand at $9,964, 36% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Bolta US, Inc. averages $4,982 across 2 cited inspections.
Bolta US, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Alabama · latest 90 days of OSHA records
100employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.
29 CFR 1926.701(b) · Concrete and Masonry Construction: general requirements
Serious
$6,157
$4,310
Apr 10, 2017
Final
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Northport site logged 7 recordable injuries or illnesses among about 315 workers: 3.2 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 34 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Bolta US
Northport · 2022
315
7
1
3.2
2.7
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Nov 15, 2016, Northport: Hospitalization · cuts, lacerations · forearm(s)
An employee was removing a filter stack from a plating line area when he tripped over the plumbing of the filter/plating line. He landed on a protruding bolt, which lacerated his left forearm.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Protection from fall hazards—(1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:
29 CFR 1926.701 · Concrete and Masonry Construction: general requirements
29 CFR 1926.701(b)
(b) Reinforcing steel. All protruding reinforcing steel, onto and into which employees could fall, shall be guarded to eliminate the hazard of impalement.
Other other motor vehicle parts manufacturing employers in Alabama
Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.