Since 2015, OSHA inspectors have visited Breaux Machine Works LP in Texas 2 times.
The most recent inspection opened on Apr 6, 2018 as a planned inspection, in Tomball.
In all, OSHA issued 5 citation items: 1 serious and 4 other-than-serious.
The proposed penalties came to $23,008; today they stand at $10,040, 56% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Breaux Machine Works LP averages $5,020 across 2 cited inspections.
Breaux Machine Works LP also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
391employers cited
5 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Tomball site logged 2 recordable injuries or illnesses among about 70 workers: 2.6 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 32 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Breaux Machine Works LP
Tomball · 2021
70
2
1
2.6
2.7
Included with any plan: 3 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was attempting to catch a part after it fell from a horizontal lathe when his right hand was caught in between the part itself and the surface of the lathe. His right pinky finger was smashed, requiring hospitalization and surgery.
Oct 1, 2015, Tomball: Hospitalization · soreness, pain, hurt-nonspecified injury · multiple body parts, n.e.c.
An employee was machining a bolt when his jacket got caught in the chuck of a horizontal lathe, which in turn pulled him into the rotating parts of the lathe. He injured his left hand and lacerated his head, requiring hospitalization.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.