OSHA SearchOSHA records by employer

Cabinetry Plus, Inc.: OSHA inspections and violations

Columbus, Wisconsin · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

4inspections
4citation items
$1,915current penalties
Apr 14, 2015last inspection

Since 2002, OSHA inspectors have visited Cabinetry Plus, Inc. in Wisconsin 4 times.

The most recent inspection opened on Apr 14, 2015 as a planned inspection, in Columbus.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $2,450; today they stand at $1,915, 22% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Cabinetry Plus, Inc. averages $1,600 across 1 cited inspection.

Cabinetry Plus, Inc.: OSHA citation items per year, 2002 to 2015
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

229employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch Cabinetry Plus, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340419175 OPENED APR 14, 2015Closed

Planned · Partial · Safety · 19 employees at the site · Closed Jul 6, 2016

100 State Road 60, Columbus, WI 53925 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
OSH Act Section 5(a)(1) · General Duty Clause
Serious$2,000$1,600Jul 16, 2015Final

Inspection 310769765 OPENED FEB 17, 2009Closed

Planned · Partial · Safety · 13 employees at the site · Closed Feb 17, 2009

100 State Road 60, Columbus, WI 53925 · Household and Institutional Furniture Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 306109414 OPENED FEB 3, 2004Closed

Planned · Partial · Safety · 21 employees at the site · Closed Mar 4, 2004

100 State Road 60, Columbus, WI 53925 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$450$315Feb 25, 2004Closed
Citation 1, item 1b
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Feb 25, 2004Closed

Inspection 303892905 OPENED NOV 18, 2002Closed

Planned · Partial · Safety · 18 employees at the site · Closed Dec 12, 2002

100 State Road 60, Columbus, WI 53925 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(h)(4) · Woodworking machinery
Other-than-serious$0$0Dec 6, 2002Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1910.213(h)(4)

(4) Installation shall be in such a manner that the front end of the unit will be slightly higher than the rear, so as to cause the cutting head to return gently to the starting position when released by the operator.

OSH Act Section 5 · General Duty Clause

Other wood kitchen cabinet and countertop manufacturing employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.