Cabinetworks Group has 7 OSHA inspections on record in Pennsylvania, the first in 2020.
OSHA's last visit started on Nov 18, 2025 after a complaint, in Mount Union, and the case has not closed yet.
Across those inspections OSHA issued 6 citation items: 4 serious and 2 other-than-serious.
OSHA proposed $45,534 in penalties. After settlements and reviews the total is $39,165, down 14%.
Most often, OSHA cited Section 5(a)(1), the General Duty Clause (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Cabinetworks Group averages $9,791 over 4 cited inspections in that time.
Cabinetworks Group also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
285employers cited
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
OSHA records show Cabinetworks Group at 5 sites in 2 states. Together they've had 9 inspections and $46,080 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 5 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Mifflinburg site logged 2 recordable injuries or illnesses among about 225 workers: 1.2 per 100 full-time workers, against a median of 3.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Cabinetworks Group
Mifflinburg · 2025
225
2
0
1.2
3.7
Cabinetworks Group Inc Thompsontown
Thompsontown · 2024
400
5
0
1.0
3.7
Cabinetworks Group
Thompsontown · 2023
658
33
10
4.6
3.7
Cabinetworks Group / Sayre
Sayre · 2023
312
6
2
2.1
3.7
Cabinetworks Group
Mount Union · 2022
100
2
0
2.4
3.7
Cabinetworks Group Thompsontown
Thompsontown · 2020
750
12
1
1.5
4.6
Cabinetworks Group/Sayre
Sayre · 2020
293
5
0
1.7
3.7
Included with any plan: 4 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On April 15, 2024, at 9:45 p.m., an employee was operating a molder machine when a piece that was running through the molder became jammed at the point of operation. The employee was unjamming the machine when their right index finger contacted a spinning cutter head, resulting in a partial amputation.
An employee had just finished cleaning up spilled water at their workstation and was pushing the mop bucket back into the break room. The door closed on the employee's hand, resulting in an amputation of the distal portion of the right ring finger.
Feb 22, 2022, Mifflinburg: Amputation · amputations · fingertip(s)
An employee was operating a machine when a loaded lumber cart moved, pinching his left hand against the machine. The tip of his ring finger was amputated.
An employee was pulling a frame cart for a new job when they tripped and fell, wedging their right pinky finger between the handles of two frame carts. The pinky finger was amputated just above the first knuckle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(f)(3)
(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(b)(2)
(2) Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.