OSHA SearchOSHA records by employer

Cage Gear and Machine, LLC: OSHA inspections and violations

Canton, Ohio · Machine Shops · NAICS 332710

1inspections
4citation items
$8,184current penalties
Nov 13, 2019last inspection

OSHA has inspected Cage Gear and Machine, LLC once in Ohio.

The inspection began on Nov 13, 2019 after a complaint, in Canton.

That inspection ended with 4 citation items: 4 serious.

Penalties were first proposed at $13,639 and now stand at $8,184, 40% lower after settlements or reviews.

Overhead and gantry cranes comes up most often in these citations: 2 items under 1910.179.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Cage Gear and Machine, LLC averages $8,184 (1 cited inspection).

Cage Gear and Machine, LLC also files yearly injury logs with OSHA, summarized below.

Cage Gear and Machine, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

263employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Cage Gear and Machine, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344444617 OPENED NOV 13, 2019Closed

Complaint · Partial · Safety · 23 employees at the site · Closed Nov 2, 2020

1776 Gateway Blvd Se, Canton, OH 44707 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$5,304$3,182Jan 6, 2020Final
Citation 1, item 2a
29 CFR 1910.179(j)(2) · Overhead and gantry cranes
Serious$3,031$1,820Jan 6, 2020Final
Citation 1, item 2b
29 CFR 1910.179(j)(3) · Overhead and gantry cranes
Serious$0$0Jan 6, 2020Final
Citation 1, item 3
29 CFR 1910.212(a)(1) · Machine guarding
Serious$5,304$3,182Jan 6, 2020Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Canton site logged 0 recordable injuries or illnesses among about 20 workers: 0.0 per 100 full-time workers, against a median of 2.1 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Cage Gear & Machine LLC
Canton · 2025
20 000.02.1
Cage Gear And Machine, LLC
Canton · 2021
22 000.02.1
Cage Gear & Machine, LLC
Canton · 2017
23 113.82.1

Included with any plan: 2 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.179(j)(2)

(2) Frequent inspection. The following items shall be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections. All deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:

29 CFR 1910.179(j)(3)

(3) Periodic inspection. Complete inspections of the crane shall be performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section, depending upon its activity, severity of service, and environment, or as specifically indicated below. These inspections shall include the requirements of paragraph (j)(2) of this section and in addition, the following items. Any deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:

29 CFR 1910.212 · Machine guarding

Other machine shops employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.