Waxahachie, Texas · Framing Contractors · NAICS 238130
Since 2016, OSHA inspectors have visited Candido Castillo in Texas 2 times.
The most recent inspection opened on Oct 26, 2018 as a planned inspection, in Waxahachie.
In all, OSHA issued 6 citation items: 4 serious and 2 repeat.
The proposed penalties came to $25,880; today they stand at $15,047, 42% less.
The rule cited most here is 1926.501 (fall protection in construction), 2 times.
Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Candido Castillo averages $7,524 across 2 cited inspections.
Want to know if OSHA cites Candido Castillo again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company220 Arborside Drive, Waxahachie, TX 75165 · Framing Contractors · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1926.102(a)(1) · Eye and face protection in construction |
Repeat | $5,913 | $3,000 | Nov 26, 2018 | Final |
| Citation 1, item 2 29 CFR 1926.501(b)(13) · Fall protection in construction |
Repeat | $10,347 | $6,756 | Nov 26, 2018 | Final |
235 Thoroughbred, Waxahachie, TX 75165 · Framing Contractors · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1926.102(a)(1) · Eye and face protection in construction |
Serious | $2,138 | $1,175 | Nov 10, 2016 | Final |
| Citation 1, item 2a 29 CFR 1926.307(d)(1) · Mechanical power-transmission apparatus |
Serious | $3,741 | $2,058 | Nov 10, 2016 | Final |
| Citation 1, item 2b 29 CFR 1926.307(e)(1)(i) · Mechanical power-transmission apparatus |
Serious | $0 | $0 | Nov 10, 2016 | Final |
| Citation 1, item 3 29 CFR 1926.501(b)(13) · Fall protection in construction |
Serious | $3,741 | $2,058 | Nov 10, 2016 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1926.102(a)(1)
(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
29 CFR 1926.307(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are 7 feet (2.128 m) or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than 6 ft. 6 in. (1.976 m) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1926.307(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are 7 feet (2.128 m) or less from the floor level, the guard shall extend to at least 15 inches (38.1 cm) above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches (106.68 cm) or less from the floor, the belt shall be fully enclosed.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.