OSHA SearchOSHA records by employer

Cantu Welding & Construction: OSHA inspections and violations

Dimmitt, Texas · Industrial Building Construction · NAICS 236210

2inspections
4citation items
$10,238current penalties
Nov 4, 2021last inspection

Cantu Welding & Construction has 2 OSHA inspections on record in Texas, the first in 2021.

OSHA's last visit started on Nov 4, 2021 to follow up on an earlier case, in Plainview.

Across those inspections OSHA issued 4 citation items: 1 serious and 3 other-than-serious.

OSHA proposed $10,238 in penalties and the amount has not been reduced.

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Cantu Welding & Construction averages $10,238 over 1 cited inspection in that time.

1 inspection on this page followed a fatal incident.

Cantu Welding & Construction: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Cantu Welding & Construction and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345624357 OPENED NOV 4, 2021Closed

Follow-up · Partial · Safety · 4 employees at the site · Closed Feb 15, 2022

1101 Holliday St., Plainview, TX 79072 · Industrial Building Construction · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 345261382 OPENED APR 19, 2021Closed

Fatality or catastrophe · Partial · Safety · 20 employees at the site · Closed Jul 20, 2021

1604 Cr 624, Dimmitt, TX 79027 · Industrial Building Construction · OSHA's record · Phone and website on Google Maps

Incident on Apr 18, 2021 (fatal): Employee is killed in fall into tunnel

At 9:30 a.m. on April 18, 2021, Employee #1 was working from the bucket of a Caterpillar telehandler fastening purlins by bolts and screws on a new building. While fastening the bolts and screws he dropped the keys used to tighten the bolts and screws. The keys fell to the ground, so a coworker lowered the bucket from the cab of the telehandler so that Employee # 1 could retrieve the keys. In order to retrieve the fallen keys, Employee #1 had to approach to within 6 feet of an unguarded opening to a cement tunnel that was dug approximately 15 feet deep. As Employee #1 reached down to retrieve the keys, he fell into the tunnel. Employee #1 fell approximately 15ft to the concrete tunnel floor and died.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(1) · Fall protection in construction
Serious$5,461$5,461Jun 15, 2021Final
Citation 2, item 1
29 CFR 1904.39(a)(1) · Reporting deaths and severe injuries
Other-than-serious$3,901$3,901Jun 15, 2021Final
Citation 2, item 2
29 CFR 1910.178(l)(6) · Forklifts and other powered industrial trucks
Other-than-serious$438$438Jun 15, 2021Final
Citation 2, item 3
29 CFR 1926.503(b)(1) · Fall protection training in construction
Other-than-serious$438$438Jun 15, 2021Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(1)

(a) Basic requirement. (1) Within eight (8) hours after the death of any employee as a result of a work-related incident, you must report the fatality to the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(l)(6)

(6) Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(1)

(b)(1) Unprotected sides and edges. Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.

29 CFR 1926.503 · Fall protection training in construction

Other industrial building construction employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.