Cascade Corporation has 9 OSHA inspections on record in Oregon, the first in 1987.
OSHA's last visit started on Feb 14, 2023 after a complaint, in Fairview.
Across those inspections OSHA issued 25 citation items: 14 serious and 11 other-than-serious.
OSHA proposed $2,595 in penalties and the amount has not been reduced.
Most often, OSHA cited 7020.2560, (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Cascade Corporation averages $300 over 1 cited inspection in that time.
Cascade Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
388employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
Incident on May 14, 2001: Employee falls from ladder
At approximately 4:00 p.m. on May 14, 2001, Employee #1 was retrieving a part th at had fallen into a sand blast area. He climbed a ladder and was stopping an ov erhead conveyor system that is part of the sand blasting operation. A piece of a ir powered equipment called a manipulator (another part of the sand blast system ) had air bleed from its system, which hit a manufactured part next to the sand blaster. This set off a chain reaction that caused the part to hit the ladder an d make Employee #1 fall 6 ft from the ladder.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Fairview site logged 5 recordable injuries or illnesses among about 267 workers: 1.8 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 323 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Cascade Corporation
Fairview · 2025
267
5
5
1.8
1.9
Included with any plan: 2 more yearly logs from these sites, back to 2023, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
(a) Use of mechanical equipment. Where mechanical handling equipment is used, sufficient safe clearances shall be allowed for aisles, at loading docks, through doorways and wherever turns or passage must be made. Aisles and passageways shall be kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. Permanent aisles and passageways shall be appropriately marked.
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.