Since 2016, OSHA inspectors have visited Cattle Empire LLC in Kansas 2 times.
The most recent inspection opened on Feb 12, 2024 on a referral, in Satanta.
In all, OSHA issued 6 citation items: 4 serious and 2 other-than-serious.
The proposed penalties came to $29,251; today they stand at $18,659, 36% less.
Among farming, fishing and forestry employers, the typical cited inspection since 2015 ends with a $1,440 penalty. Cattle Empire LLC averages $9,330 across 2 cited inspections.
Cattle Empire LLC also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Kansas · latest 90 days of OSHA records
43employers cited
Get notified the morning OSHA posts each new citation in Kansas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2016, the Satanta site logged 4 recordable injuries or illnesses among about 127 workers: 2.6 per 100 full-time workers, against a median of 4.7 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Yard 2
Satanta · 2016
127
4
1
2.6
4.7
Yard 1
Satanta · 2016
61
9
5
11.7
4.7
Yard 3
Satanta · 2016
51
5
1
7.7
4.7
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
Feb 6, 2024, Satanta: Hospitalization, amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
Two employees were unloading an auger from a delivery truck. The injured employee was supporting the auger while the other employee used equipment to grab it. The auger suddenly twisted, and its sharp tip struck the first employee's left ring finger. The fingertip was amputated and the middle of the finger was broken. The employee was hospitalized.
An employee was sorting cattle and one of the cows kicked the employee in the leg causing a bruise and a large hematoma. He was admitted to the hospital to have the hematoma drained.
An employee was clearing a rock from rollers inside a grain flaker. The rock was lodged between the rollers and the employee cut his right middle finger on the access door when he was pulling back on the tool. The laceration and bone injury required amputation of the injured finger.
Jan 26, 2017, Satanta: Hospitalization · fractures · leg(s), unspecified
An employee was riding a horse in the cattle pen. The horse slipped in the mud and fell on the rider. The employee suffered a fractured leg.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Kansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.