Central States Manufacturing, Inc.: OSHA inspections and violations
Cedar Hill, Texas · Prefabricated Metal Building and Component Manufacturing · NAICS 332311
4inspections
3citation items
$18,146current penalties
Mar 19, 2026last inspection
OSHA has inspected Central States Manufacturing, Inc. 4 times in Texas since 2004.
The latest one began on Mar 19, 2026 on a referral, in Cedar Hill; the case is still open.
Those inspections ended with 3 citation items: 3 serious.
Penalties were first proposed at $40,094 and now stand at $18,146, 55% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 2 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Central States Manufacturing, Inc. averages $9,073 (2 cited inspections).
Central States Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Central States Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on May 4, 2020: Employee amputates fingertips on trim folding machine
At 3:00 p.m. on May 4, 2020, an employee was holding a piece of sheet metal to be folded in the trim machine. The employee's hand was caught in the trim machine. The employee amputated fingertips. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Cedar Hill site logged 8 recordable injuries or illnesses among about 114 workers: 7.3 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 66 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Central States Manufacturing - Cedar Hill
Cedar Hill · 2023
114
8
4
7.3
3.6
Central States Manufacturing - Sequin
Seguin · 2023
77
3
1
4.1
3.6
Cedar Hill CSMI
Cedar Hill · 2021
111
8
4
7.5
3.6
Seguin CSMI
Seguin · 2021
70
6
3
9.7
3.6
Included with any plan: 2 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Other prefabricated metal building and component manufacturing employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.