Hillsboro, Texas · All Other Miscellaneous Wood Product Manufacturing · NAICS 321999
1inspections
2citation items
$14,000current penalties
Jan 30, 2018last inspection
OSHA inspectors have visited Clayton Supply in Texas one time.
It opened on Jan 30, 2018 on a referral, in Hillsboro.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $24,020; today they stand at $14,000, 42% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Clayton Supply averages $14,000 across 1 cited inspection.
Clayton Supply also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
391employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Jan 25, 2018: Employee's right arm is fractured when pulled into spindle
At 3:30 p.m. on January 25, 2018, an employee was reaching to pull paper off a spindle when she was pulled into the equipment. The employee sustained a compound fracture to her right arm.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Hillsboro site logged 2 recordable injuries or illnesses among about 68 workers: 3.2 per 100 full-time workers, against a median of 4.6 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Fontana of Texas
Hillsboro · 2020
68
2
1
3.2
4.6
Clayton Windows of Texas
Hillsboro · 2020
68
2
1
3.7
4.6
Classic Panel of Texas
Hillsboro · 2020
31
3
3
9.8
2.1
Clayton Supply of Texas
Hillsboro · 2020
15
2
0
15.6
2.6
Clayton Millworks of Texas
Hillsboro · 2019
18
0
0
0.0
4.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
May 20, 2019, Hillsboro: Hospitalization · cuts, lacerations · forearm(s)
An employee was placing broken glass into a hopper when the glass hit another piece of glass, which then struck the employee. The employee suffered a severe laceration to the lower forearm.
Jan 25, 2018, Hillsboro: Hospitalization · fractures · arm(s), unspecified
An employee was reaching to pull paper off a spindle when she was pulled into the equipment. She suffered a compound fracture to her right arm, requiring hospitalization.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(f)(3)
(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.
Other all other miscellaneous wood product manufacturing employers in Texas
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.
