OSHA SearchOSHA records by employer

Compton's Precision Machine & Tool dba Eastern Enterprise: OSHA inspections and violations

Springfield, Ohio · Machine Shops · NAICS 332710

1inspections
7citation items
$20,000current penalties
Jan 10, 2023last inspection

Compton's Precision Machine & Tool dba Eastern Enterprise has one OSHA inspection on record in Ohio.

OSHA opened it on Jan 10, 2023 after a fatality or catastrophe, in Springfield.

From that inspection OSHA issued 7 citation items: 7 serious.

OSHA proposed $40,625 in penalties. After settlements and reviews the total is $20,000, down 51%.

Most often, OSHA cited 1910.147, lockout/tagout (4 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Compton's Precision Machine & Tool dba Eastern Enterprise averages $20,000 over 1 cited inspection in that time.

1 inspection on this page followed a fatal incident.

Compton's Precision Machine & Tool dba Eastern Enterprise: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

267employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Compton's Precision Machine & Tool dba Eastern Enterprise and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346431125 OPENED JAN 10, 2023Closed

Fatality or catastrophe · Partial · Safety · 13 employees at the site · Closed Jan 12, 2024

224 Dayton Avenue, Springfield, OH 45506 · Machine Shops · OSHA's record · Phone and website on Google Maps

Incident on Jan 10, 2023 (fatal): Employee is killed when pulled into unguarded lathe

At 7:45 a.m. on January 1, 2023, an employee was operating a CNC machine with the L front access gate open. The machine did not have any interlocks or guarding, and no machine specific lockout/tagout procedures. The employer did not provide training on PPE, guarding, or lockout/tagout procedures. The employee was leaning above and over the machine's rotating spindle and was pulled into the lathe, causing multiple unspecified crush injuries. The employee was transported to a hospital and died a few hours later.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.132(d)(1) · Personal protective equipment, general requirements
Serious$6,250$2,500May 18, 2023Final
Citation 1, item 2
29 CFR 1910.147(d) · Lockout/tagout
Serious$6,250$2,500May 18, 2023Final
Citation 1, item 3
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Serious$6,250$2,500May 18, 2023Final
Citation 1, item 4a
29 CFR 1910.132(f)(1) · Personal protective equipment, general requirements
Serious$6,250$2,500May 18, 2023Final
Citation 1, item 4b
29 CFR 1910.147(c)(7)(i)(a) · Lockout/tagout
Serious$0$0May 18, 2023Final
Citation 1, item 4c
29 CFR 1910.147(c)(7)(i)(b) · Lockout/tagout
Serious$0$0May 18, 2023Final
Citation 1, item 5
29 CFR 1910.212(a)(1) · Machine guarding
Serious$15,625$10,000May 18, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(1)

(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:

29 CFR 1910.132(f)(1)

(f) Training. (1) The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following:

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.212 · Machine guarding

Other machine shops employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.