Since 2011, OSHA inspectors have visited Cox Manufacturing Company in Texas 3 times.
The most recent inspection opened on Apr 15, 2015 as a planned inspection, in San Antonio.
In all, OSHA issued 6 citation items: 5 serious and 1 other-than-serious.
The proposed penalties came to $17,190; today they stand at $10,725, 38% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Cox Manufacturing Company averages $5,400 across 1 cited inspection.
Cox Manufacturing Company also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
401employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the San Antonio site logged 5 recordable injuries or illnesses among about 208 workers: 2.6 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Cox Manufacturing Co., Inc. (2)
San Antonio · 2025
208
5
1
2.6
2.7
Cox Manufacturing Co., Inc.
San Antonio · 2024
197
6
1
3.2
2.7
Cox Manufacturing Company, Inc.
San Antonio · 2019
175
4
1
2.4
2.7
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(3) The employer shall ensure that each affected employee who wears prescription lenses while engaged in operations that involve eye hazards wears eye protection that incorporates the prescription in its design, or wears eye protection that can be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.