Since 1976, OSHA inspectors have visited Creative Pultrusions, Inc. in Pennsylvania 13 times.
The most recent inspection opened on Feb 4, 2020 on a referral, in Alum Bank.
In all, OSHA issued 27 citation items: 19 serious and 8 other-than-serious.
The proposed penalties came to $28,540; today they stand at $20,245, 29% less.
The rule cited most here is 1910.147 (lockout/tagout), 6 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Creative Pultrusions, Inc. averages $5,000 across 1 cited inspection.
Creative Pultrusions, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Pennsylvania · latest 90 days of OSHA records
285employers cited
5 of them in the same industry
Get notified the morning OSHA posts each new citation in Pennsylvania: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Creative Pultrusions, Inc. and get notified the morning OSHA posts a new citation for it.
Incident on Jan 27, 2020: Employee fractures leg when struck by falling fiberglass
At 5:30 a.m. on January 27, 2020, an employee was attempting to place a clevis pin on a section of fiberglass cooling tower wall when group of 30 foot long fiberglass sections fell onto him. The employee was hospitalized to treat a fractured right.
Incident on Mar 3, 2017: Employee amputates finger on miter saw
At 11:15 a.m. on March 3, 2017, an employee was using a miter saw to cut a wood skid to a length of 24 inches. During operation, one of the employee's gloves contacted the saw blade and was pulled into the saw. One of his fingers on that hand was amputated.
No citations from this inspection.
Inspection 306960816 OPENED MAY 3, 2004Closed
Planned · Partial · Safety · 200 employees at the site · Closed May 10, 2004
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Alum Bank site logged 5 recordable injuries or illnesses among about 266 workers: 2.0 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 86 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Creative Pultrusions
Alum Bank · 2025
266
5
1
2.0
2.6
Creative Pultrusions - PA
Alum Bank · 2018
167
12
4
7.9
2.6
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Jan 27, 2020, Alum Bank: Hospitalization · fractures · thigh(s)
An employee was attempting to put a clevis on a section of fiberglass walls stored on a cart. The sections are used to make cooling towers. The employee moved a piece to clear the clevis and approximately 10-12 4'x30' sections fell over and struck the employee on his left femur. The employee was knocked to the ground and the pieces landed on his leg. He sustained a broken left femur that required surgical repair.
An employee was operating a table-top miter saw when his glove got caught in the saw blade, pulling his left fifth finger into the saw blade. A physician later amputated part of the employee's finger.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Spray booths—(1) Construction. Spray booths shall be substantially constructed of steel, securely and rigidly supported, or of concrete or masonry except that aluminum or other substantial noncombustible material may be used for intermittent or low volume spraying. Spray booths shall be designed to sweep air currents toward the exhaust outlet.
29 CFR 1910.107(b)(6)
(6) Frontal area. Each spray booth having a frontal area larger than 9 square feet shall have a metal deflector or curtain not less than 2 1/2 inches deep installed at the upper outer edge of the booth over the opening.
29 CFR 1910.107(c)(6)
(6) Wiring type approved. Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined shall be of explosion-proof type approved for Class I, group D locations and shall otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations. Electrical wiring, motors, and other equipment outside of but within twenty (20) feet of any spraying area, and not separated therefrom by partitions, shall not produce sparks under normal operating conditions and shall otherwise conform to the provisions of subpart S of this part for Class I, Division 2 Hazardous Locations.
Alert subscribers get notified of each newly cited employer in Pennsylvania the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.