OSHA SearchOSHA records by employer

Crown Distributing Co: OSHA inspections and violations

Ottumwa, Iowa · Ice Manufacturing · NAICS 312113

1inspections
5citation items
$6,003current penalties
Oct 9, 2020last inspection

OSHA has inspected Crown Distributing Co once in Iowa.

The inspection began on Oct 9, 2020 on a referral, in Ottumwa.

That inspection ended with 5 citation items: 4 serious and 1 other-than-serious.

Penalties were first proposed at $8,845 and now stand at $6,003, 32% lower after settlements or reviews.

Belts, pulleys and power-transmission parts comes up most often in these citations: 3 items under 1910.219.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,874, and Crown Distributing Co averages $6,003 (1 cited inspection).

Crown Distributing Co: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

69employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Crown Distributing Co and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344968813 OPENED OCT 9, 2020Closed

Referral · Partial · Safety · 12 employees at the site · Closed Apr 2, 2021

1118 Hayne St, Ottumwa, IA 52501 · Ice Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Oct 2, 2020: Employee amputates arm when caught in ice bagging machine au

At 8:30 a.m. on October 2, 2020, an employee was working as a machine operator for an ice manufacturer. The employee was attempting to remove ice that was clogging the supply line to a Hamer Inc. Model #535 H S (serial number 0053517) ice bagging machine. The employee climbed the machine framing to try and remove the chunk of ice blocking the line. The supply line consisted of an 8-inch stainless steel screw auger surrounded by a trough with a guard on top. The employee lifted the approximately 12-inch by 12-inch hinged door located in the guarded top of the trough and used his right arm to reach into the opening to remove the ice. The screw auger was operational at the time. The employee's coat became entangled in the rotating screw auger and pulled is right arm into the auger. This employee amputated his right arm approximately 3 inches from the shoulder and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$2,842$2,842Mar 5, 2021Final
Citation 1, item 2a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$2,842$1,421Mar 5, 2021Final
Citation 1, item 2b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Mar 5, 2021Final
Citation 1, item 3
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$2,842$1,421Mar 5, 2021Final
Citation 2, item 1
29 CFR 1904.40(a) · Giving injury records to OSHA
Other-than-serious$319$319Mar 5, 2021Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.40 · Giving injury records to OSHA

29 CFR 1904.40(a)

(a) Basic requirement. When an authorized government representative asks for the records you keep under part 1904, you must provide copies of the records within four (4) business hours.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other ice manufacturing employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.