OSHA SearchOSHA records by employer

CWP Asset Corp.: OSHA inspections and violations

Houston, Texas · Car Washes · NAICS 811192

2inspections
3citation items
$1,630current penalties
Feb 20, 2025last inspection

Since 2017, OSHA inspectors have visited CWP Asset Corp. in Texas 2 times.

The most recent inspection opened on Feb 20, 2025 as part of a related case, in Houston.

In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

The proposed penalties came to $8,149; today they stand at $1,630, 80% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 2 times.

Among repair and personal services employers, the typical cited inspection since 2015 ends with a $1,200 penalty. CWP Asset Corp. averages $1,630 across 1 cited inspection.

It reported 2 severe injuries to OSHA since 2015.

CWP Asset Corp.: OSHA citation items per year, 2017 to 2025
Citation items per year, by inspection date.

Want to know if OSHA cites CWP Asset Corp. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348054552 OPENED FEB 20, 2025Closed

Unprogrammed related · Partial · Safety · 675 employees at the site · Closed Jun 17, 2025

210 Farm To Market 1960 Road East, Houston, TX 77073 · Car Washes · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 342113164 OPENED FEB 17, 2017Closed

Referral · Partial · Health · 58 employees at the site · Closed Jul 31, 2018

6107 Hillcroft, Houston, TX 77081 · Car Washes · OSHA's record · Phone and website on Google Maps

Incident on Feb 12, 2017: Employee catches and fractures fingers in running pump

At approximately 9:30 a.m. on February 12, 2017, Employee #1 was checking a running pump. As he examined the pump, he lost his balance and slipped forward. His fingers nicked belts running within the pump, which fractured his right index and ring fingers. Employee #1 was transported to a medical center, where he underwent surgical procedures to stabilize the fractures, received additional treatment, and was then hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 2a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$6,519$1,630Apr 19, 2017Final
Citation 1, item 2b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Apr 19, 2017Final
Citation 2, item 1
29 CFR 1904.32(b)(6) · Yearly injury summary
Other-than-serious$1,630$0Apr 19, 2017Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Feb 16, 2018, Houston: Hospitalization · major tears to muscles, tendons, ligaments · leg(s), unspecified

An employee working at the car wash was struck by a reversing vehicle resulting in a torn ligament in the left leg.

Feb 12, 2017, Houston: Hospitalization · fractures · finger(s), fingernail(s), unspecified

An employee was attempting to adjust the machine pump in a high-pressure system used to wash cars when the employee's right ring finger was caught and fractured in the pump.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.32 · Yearly injury summary

29 CFR 1904.32(b)(6)

(6) When do I have to post the annual summary? You must post the summary no later than February 1 of the year following the year covered by the records and keep the posting in place until April 30.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.

Other car washes employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.