Since 2006, OSHA inspectors have visited Cyclone Drilling, Inc. in North Dakota 10 times.
The most recent inspection opened on Mar 12, 2024 after a fatality or catastrophe, in Killdeer.
In all, OSHA issued 22 citation items: 12 serious and 10 other-than-serious.
The proposed penalties came to $178,826; today they stand at $82,576, 54% less.
The rule cited most here is Section 5(a)(1) (the General Duty Clause), 7 times.
Among mining and oil and gas employers, the typical cited inspection since 2015 ends with a $2,883 penalty. Cyclone Drilling, Inc. averages $12,676 across 1 cited inspection.
3 inspections on this page followed a fatal incident.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
North Dakota · latest 90 days of OSHA records
32employers cited
Get notified the morning OSHA posts each new citation in North Dakota: the employer, the site address, the rules broken and the penalty.
OSHA records show Cyclone Drilling, Inc. at 30 sites in 4 states. Together they've had 71 inspections and $264,679 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 30 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Jan 8, 2011 (fatal): Employee is killed in slip and fall on stairway
At approximately 5:35 a.m. on January 8, 2011, Employee #1 and Employee #2, of C yclone Drilling, were starting their day on the rig. Employee #1 went to change into his work attire upstairs in the Warm House. Employee #2 observed Employee # 1 running to the stairway, but he soon lost sight of Employee #1. When the tour began, Employee #1 was nowhere to be seen. Employee #2 and other crew members we nt to look for him. He was found face down, in a puddle of water, dead. No one w itnessed the accident; however, evidence on site presumed that Employee #1 may h ave slipped going up the stairway. As a result, he struck his head, slid underne ath the stair rail and fell approximately 17 ft to the ground.
No citations from this inspection.
Inspection 314356577 OPENED MAY 25, 2010Closed
Complaint · No inspection · Safety · Closed May 26, 2010
Incident on May 15, 2008 (fatal): Employee dies after being struck by clamp
On May 15, 2008, Employee #1 was working with a well drilling crew using Cyclone Drilling Rig Number 20. The drilling crew was changing out the stripper rubber at the top of the rotating head. The rotating head was under pressure and had no t been bled off prior to releasing the clamp that holds the stripper rubber in p lace. Employee #1 loosened the bolt on the clamp but could not get the bolt out of the clasp. He was using a tool pusher to pry the bolt free, and was injured w hen he was struck by the clamp when the pressure blew it open. He suffered fract ures to the upper body, neck, and head. He died.
Incident on Apr 4, 2006 (fatal): Employee is killed when struck by falling object
On April 4, 2006, Employee #1, a tool pusher, was positioning a gas buster conta iner via a lift system, when the rope of the system broke. The container fell, s triking him in his abdominal region. The impact of the container upon his body k illed him.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Mar 11, 2024, Killdeer: Hospitalization · fractures · multiple body parts n.e.c.
An employee was pulling drill line from the drill spool while the top drive was not set on the docking pins. The deadman was unexpectedly released which caused the top drive to fall to the drill floor from a height of 30 feet. This caused the drill line that was being pulled out and laid on the ground to retract and strike an employee. The employee suffered fractures to his legs and neck.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Basic requirement. You must use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. The OSHA 300 form is called the Log of Work-Related Injuries and Illnesses, the 300-A is the Summary of Work-Related Injuries and Illnesses, and the OSHA 301 form is called the Injury and Illness Incident Report.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(a)
(a) Application. Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, shall be provided, used, and maintained in a sanitary and reliable condition wherever it is necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation or physical contact.
29 CFR 1910.132(h)(1)
(h) Payment for protective equipment. (1) Except as provided by paragraphs (h)(2) through (h)(6) of this section, the protective equipment, including personal protective equipment (PPE), used to comply with this part, shall be provided by the employer at no cost to employees.
Alert subscribers get notified of each newly cited employer in North Dakota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.