OSHA SearchOSHA records by employer

Daniel A. Bollen: OSHA inspections and violations

Utica, New York · Couriers and Express Delivery Services · NAICS 492110

1inspections
5citation items
$2,996current penalties
Nov 1, 2023last inspection

OSHA inspectors have visited Daniel A. Bollen in New York one time.

It opened on Nov 1, 2023 as a planned inspection, in Utica.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $11,984; today they stand at $2,996, 75% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 3 times.

Among transportation and warehousing employers, the typical cited inspection since 2015 ends with a $3,555 penalty. Daniel A. Bollen averages $2,996 across 1 cited inspection.

Daniel A. Bollen: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites Daniel A. Bollen again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347073447 OPENED NOV 1, 2023Closed

Planned · Complete · Safety · 20 employees at the site · Closed Apr 10, 2026

1930 Beechgrove Place, Utica, NY 13501 · Couriers and Express Delivery Services · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
OSH Act Section 5(a)(1) · General Duty Clause
 Serious$4,610$1,152Apr 23, 2024Final
Citation 1, item 3
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$3,687$922Apr 23, 2024Final
Citation 1, item 4a
29 CFR 1910.215(a)(2) · Grinders and abrasive wheels
 Serious$3,687$922Apr 23, 2024Final
Citation 1, item 4b
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$0$0Apr 23, 2024Final
Citation 1, item 4c
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Serious$0$0Apr 23, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(2)

(2) Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except:

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

OSH Act Section 5 · General Duty Clause

Other couriers and express delivery services employers in New York

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.