Conway, Arkansas · Motor Vehicle Metal Stamping · NAICS 336370
4inspections
6citation items
$196,289current penalties
Sep 23, 2024last inspection
DBG Arkansas LLC has 4 OSHA inspections on record in Arkansas, the first in 2019.
OSHA's last visit started on Sep 23, 2024 on a referral, in Conway, and the case has not closed yet.
Across those inspections OSHA issued 6 citation items: 4 serious, 1 repeat and 1 other-than-serious.
OSHA proposed $339,264 in penalties. After settlements and reviews the total is $196,289, down 42%.
Most often, OSHA cited 1910.212, machine guarding (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. DBG Arkansas LLC averages $65,430 over 3 cited inspections in that time.
DBG Arkansas LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Arkansas · latest 90 days of OSHA records
16employers cited
Get notified the morning OSHA posts each new citation in Arkansas: the employer, the site address, the rules broken and the penalty.
Incident on Mar 6, 2020: Employee suffers amputation of eight fingers on press brake
At 8:13 p.m. on March 6, 2020, a middle-aged employee was working for a firm that stamped out metal parts and components for motor vehicles. Its main customer was a bus factory in the next state over. The employee had been on the job for only a month. He was still in his probationary period. He was operating a 90-ton (800-kilonewton) Cincinnati model 90 CB-2 press brake, with serial number 52227 and facility designation P-23. It was guarded only with a light curtain. Earlier in the day, an employee on the morning shift had selected the program to manufacture a battery box. For this purpose, the mute on the light curtain was set at 5 inches (127 mm). During the evening shift, the employee in the incident was operating the press brake to make parts for school buses. The light curtain mute was still at 5 inches (127 mm). For the parts the employee in the incident was making, an appropriate mute would have been 0.25 or 0.5 in. (6.35 or 12.7 mm). The employee placed his hands into the point of operation. The press brake actuated, and the employee suffered the amputation of eight fingers near the third joints. He was hospitalized. Individual operators had the ability to set their own mute areas and did not know the distance of the muted area when they brought up a program for a part. That employee who had set the brake to make battery boxes stated that she sometimes had to reach her fingers into the point of operation on smaller parts. Although tool use was allowed, there was no policy mandating their use. Employees made hundreds of parts over the course of the day while the machine was setup with a five-inch muted area, increasing the likelihood that the machine would operate with a finger or hand inside the point of operation. Employees performed setup of the machine at varying intervals, approximately once per day. There was an amputation on a different but similar press brake at the facility on September 30, 2019. That was investigation number 120618 and UPA 1504244.
Incident on Sep 30, 2019: Employee amputates three fingers in press brake
At 11:15 p.m. on September 30, 2019, an employee was operating a press brake at an automobile metal part manufacturing facility. When the employee was operating a press brake, his left hand fingers were caught in the equipment's point of operation. The employee incurred an amputation of three fingers on his left hand and received medical treatment without hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Conway site logged 9 recordable injuries or illnesses among about 213 workers: 4.6 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 194 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
DBG Arkansas, LLC
Conway · 2020
213
9
2
4.6
3.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Feb 22, 2022, Conway: Hospitalization · crushing injuries · heel(s)
The injured employee was hanging 400-pound fuel tank cages on a paint line. A co-worker was using a forklift to place a stack of parts down and began to down stack the product. When down stacking the product, the forklift bumped a lower unit and the unit fell over, striking the floor and sliding into the injured employee's left heel, resulting in a crush injury.
As an employee was operating a brake press, their hand became caught in a pinch point, making contact with the material being bent and the upper die ram. Two of the employee's right-hand fingertips were amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in Arkansas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.