Dee Zee Manufacturing: OSHA inspections and violations
Des Moines, Iowa · Other Motor Vehicle Parts Manufacturing · NAICS 336390
7inspections
23citation items
$18,897current penalties
Oct 6, 2021last inspection
Since 1985, OSHA inspectors have visited Dee Zee Manufacturing in Iowa 7 times.
The most recent inspection opened on Oct 6, 2021 on a referral, in Des Moines.
In all, OSHA issued 23 citation items: 11 serious and 12 other-than-serious.
The proposed penalties came to $19,777; today they stand at $18,897, 4% less.
The rule cited most here is 1910.134 (respiratory protection), 11 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Dee Zee Manufacturing averages $9,138 across 2 cited inspections.
Dee Zee Manufacturing also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
64employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Incident on Oct 1, 2021: Employee sustains chest injuries in fall from rotating table
At 3:45 p.m. on October 1, 2021, an employee working production for a motor vehicle parts manufacturer entered a Ford Assembly Cell without locking out the cell. The employee stood on the rotating table to clean a sensor. After the sensor was cleaned and reconnected, the rotating table started up. The employee fell from the table to the concrete floor. The employee broke three ribs and bruised his lungs and was hospitalized.
Incident on Oct 24, 2019: Two employees are injured when moving check fixture
At 6:45 a.m. on October 24, 2019, two employees were attempting to move a wheeled check fixture from under a metal rack system. Employee #1 was standing in front of a wheeled check fixture pulling from the top portion of the frame when a caster wheel became lodged in a floor joint. When Employee #1 attempted to maneuver the fixture over the floor gap, the object tipped forward knocking him to the ground and pinning his legs between the fixture frame and the concrete floor. Employee #2 was attempting to lift the check fixture off of the legs of Employee #1 by grasping the left corner of the fixture when several coworkers attempted to lift the right side of the fixture and the object tipped down pinching Employee #2's gloved right hand between the fixture and the concrete floor. Employee #1 was hospitalized to treat fractures of both lower legs. Employee #2 suffered a amputation of his right middle fingertip and was hospitalized for treatment.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 88.4 - CODE OF IOWA (2019)
Other-than-serious
$8,524
$8,524
Jan 22, 2020
Final
Inspection 115060741 OPENED FEB 9, 1993Closed
Complaint · Partial · Health · 250 employees at the site · Closed Apr 6, 1993
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Des Moines site logged 1 recordable injury or illness among about 71 workers: 1.5 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Dee Zee Extrusion
Des Moines · 2023
71
1
0
1.5
2.7
Dee Zee Main
Des Moines · 2016
452
17
2
4.5
2.7
Dee Zee Broadway
Des Moines · 2016
415
11
1
2.9
2.7
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Table Z-3. An employee's exposure to any substance listed in Table Z-3, in any 8-hour work shift of a 40-hour work week, shall not exceed the 8-hour time weighted average limit given for that substance in the table.
29 CFR 1910.1000(e)
(e) To achieve compliance with paragraphs (a) through (d) of this section, administrative or engineering controls must first be determined and implemented whenever feasible. When such controls are not feasible to achieve full compliance, protective equipment or any other protective measures shall be used to keep the exposure of employees to air contaminants within the limits prescribed in this section. Any equipment and/or technical measures used for this purpose must be approved for each particular use by a competent industrial hygienist or other technically qualified person. Whenever respirators are used, their use shall comply with 1910.134.
(3) Residue disposal. Residue scrapings and debris contaminated with residue shall be immediately removed from the premises and properly disposed of. Approved metal waste cans shall be provided wherever rags or waste are impregnated with finishing material and all such rags or waste deposited therein immediately after use. The contents of waste cans shall be properly disposed of at least once daily or at the end of each shift.
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.