OSHA SearchOSHA records by employer

Deltro Electric Ltd: OSHA inspections and violations

Mount Orab, Ohio · Electrical Contractors and Other Wiring Installation Contractors · NAICS 238210

1inspections
5citation items
$12,145current penalties
Oct 5, 2020last inspection

OSHA has inspected Deltro Electric Ltd once in Ohio.

The inspection began on Oct 5, 2020 on a referral, in Mount Orab.

That inspection ended with 5 citation items: 5 other-than-serious.

Penalties were first proposed at $36,435 and now stand at $12,145, 67% lower after settlements or reviews.

Training comes up most often in these citations: 2 items under 1910.332.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Deltro Electric Ltd averages $12,145 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Deltro Electric Ltd: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

273employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Deltro Electric Ltd and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344958210 OPENED OCT 5, 2020Closed

Referral · Partial · Safety · 7 employees at the site · Closed Oct 6, 2021

5416 State Route 286, Mount Orab, OH 45154 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Incident on Sep 26, 2020: Employee is shocked while rewiring solar panel connector, su

At 4:55 p.m. on September 26, 2020, Employee #1, employed by a solar panel installation company, was attempting to rewire a bad connector for a solar panel system. Employee #2 mistakenly plugged in the wrong wiring harness, and while attempting to disconnect it, an arc flash occurred, burning the end of the cable. As Employee #1 proceeded to cut the second wire, his elbow touched a metal framing, causing the employee to become grounded and receive a shock. The shock resulted in an irregular heartbeat. The employee was treated for the injury but did not require hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.269(d)(2)(i) · Electric power generation, transmission, and distribution
Other-than-serious$12,145$12,145Jan 12, 2021Final
Citation 1, item 1b Other-than-serious$12,145$0Jan 12, 2021Final
Citation 1, item 1c
29 CFR 1910.332(c) · Training
Other-than-serious$0$0Jan 12, 2021Final
Citation 1, item 1d
29 CFR 1910.333(c)(2) · Working near live electrical parts
Other-than-serious$12,145$0Jan 12, 2021Final
Citation 1, item 1e
29 CFR 1910.335(a)(1)(i) · Safeguards for personnel protection
Other-than-serious$0$0Jan 12, 2021Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Sep 26, 2020, Mount Orab: Hospitalization · electrocutions, electric shocks · body systems

An employee was cutting the heads off a solar panel harness when he touched the torque tube (metal frame on solar panel) and was shocked. He suffered a loss of consciousness and had an irregular heartbeat.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.269 · Electric power generation, transmission, and distribution

29 CFR 1910.269(d)(2)(i)

(2) General. (i) The employer shall establish a program consisting of energy control procedures, employee training, and periodic inspections to ensure that, before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up, or release of stored energy could occur and cause injury, the machine or equipment is isolated from the energy source and rendered inoperative.

29 CFR 1910.332 · Training

29 CFR 1910.332(b)(3)

(3) Additional requirements for qualified persons. Qualified persons (i.e., those permitted to work on or near exposed energized parts) shall, at a minimum, be trained in and familiar with the following:

29 CFR 1910.332(c)

(c) Type of training. The training required by this section shall be of the classroom or on-the-job type. The degree of training provided shall be determined by the risk to the employee.

29 CFR 1910.333 · Working near live electrical parts

29 CFR 1910.335 · Safeguards for personnel protection

Other electrical contractors and other wiring installation contractors employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.