OSHA SearchOSHA records by employer

Division 5, LLC: OSHA inspections and violations

Winston Salem, North Carolina · Fabricated Structural Metal Manufacturing · NAICS 332312

1inspections
6citation items
$4,900current penalties
Jan 9, 2024last inspection

OSHA inspectors have visited Division 5, LLC in North Carolina one time.

It opened on Jan 9, 2024 as a planned inspection, in Winston Salem.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $6,975; today they stand at $4,900, 30% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Division 5, LLC averages $4,900 across 1 cited inspection.

Division 5, LLC: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

Want to know if OSHA cites Division 5, LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347207581 OPENED JAN 9, 2024Closed

Planned · Partial · Safety · 68 employees at the site · Closed Mar 26, 2024

1720 Vargrave Street, Winston Salem, NC 27107 · Fabricated Structural Metal Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$1,500$1,050Feb 15, 2024Final
Citation 1, item 2
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$1,500$1,050Feb 15, 2024Final
Citation 1, item 3a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$975$700Feb 15, 2024Final
Citation 1, item 3b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Serious$0$0Feb 15, 2024Final
Citation 1, item 4
29 CFR 1910.253(b)(2)(i) · Gas welding and cutting
 Serious$1,500$1,050Feb 15, 2024Final
Citation 1, item 5
29 CFR 1910.303(g)(2)(i) · Electrical equipment, general requirements
 Serious$1,500$1,050Feb 15, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.303 · Electrical equipment, general requirements

Other fabricated structural metal manufacturing employers in North Carolina

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.