OSHA SearchOSHA records by employer

Duffney Custom Cabinets LLC: OSHA inspections and violations

Deerwood, Minnesota · Wood Kitchen Cabinet and Countertop Manufacturing · NAICS 337110

1inspections
5citation items
$2,850current penalties
Jul 2, 2026last inspection

OSHA has inspected Duffney Custom Cabinets LLC once in Minnesota.

The inspection began on Jul 2, 2026 as a planned inspection, in Deerwood.

That inspection ended with 5 citation items: 5 serious.

Penalties were first proposed at $2,850 and still stand at $2,850.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Duffney Custom Cabinets LLC averages $2,850 (1 cited inspection).

Duffney Custom Cabinets LLC: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Minnesota · latest 90 days of OSHA records

380employers cited

6 of them in the same industry

Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Minnesota

Checking a subcontractor, a client or your own company? Watch Duffney Custom Cabinets LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 349032581 OPENED JUL 2, 2026Closed

Planned · Complete · Safety · 4 employees at the site · Closed Aug 18, 2026

13184 Mn-6, Deerwood, MN 56444 · Wood Kitchen Cabinet and Countertop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.134(a)(2) · Respiratory protection
Serious$450$450Jul 20, 2026Final
Citation 1, item 2
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$750$750Jul 20, 2026Final
Citation 1, item 3
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$450$450Jul 20, 2026Final
Citation 1, item 4
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$750$750Jul 20, 2026Final
Citation 1, item 5
29 CFR 1910.242(b) · Hand and power tools
Serious$450$450Jul 20, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(a)(2)

(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.242 · Hand and power tools

Other wood kitchen cabinet and countertop manufacturing employers in Minnesota

Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.