OSHA SearchOSHA records by employer

Duroair Technologies Inc: OSHA inspections and violations

Greenville, South Carolina · Industrial Design Services · NAICS 541420

2inspections
5citation items
$5,800current penalties
Nov 18, 2021last inspection

Since 2021, OSHA inspectors have visited Duroair Technologies Inc in South Carolina 2 times.

The most recent inspection opened on Nov 18, 2021 to follow up on an earlier case, in Greenville.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $7,050; today they stand at $5,800, 18% less.

The rule cited most here is 1926.501 (fall protection in construction), 2 times.

Among professional services employers, the typical cited inspection since 2015 ends with a $1,822 penalty. Duroair Technologies Inc averages $5,800 across 1 cited inspection.

1 inspection on this page followed a fatal incident.

Duroair Technologies Inc: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

South Carolina · latest 90 days of OSHA records

43employers cited

Get notified the morning OSHA posts each new citation in South Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in South Carolina

Checking a subcontractor, a client or your own company? Watch Duroair Technologies Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345651228 OPENED NOV 18, 2021Closed

Follow-up · Partial · Safety · 1 employee at the site · Closed Feb 14, 2022

244 Terminal Rd, Greenville, SC 29605 · Industrial Design Services · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 345349229 OPENED JUN 2, 2021Closed

Fatality or catastrophe · Partial · Safety · 1 employee at the site · Closed Feb 14, 2022

244 Terminal Rd, Greenville, SC 29605 · Industrial Design Services · OSHA's record · Phone and website on Google Maps

Incident on Jun 10, 2021 (fatal): Employee dies after falling from elevation

On June 10, 2021, an employee was working for a firm that designed and manufactured equipment to provide clean air in industrial settings. He was working at a site owned by an aerospace contractor where aircraft were built. He was installing a media blast. He fell approximately 25 feet (7.6 meters) to a concrete floor. He was hospitalized. He died of his injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 5
29 CFR 1926.503(a)(1) · Fall protection training in construction
Serious$2,800$2,800Sep 7, 2021Final
Citation 1, item 6a Serious$625$2,000Sep 7, 2021Final
Citation 1, item 6b
29 CFR 1926.454(a) · Scaffold training
Serious$2,000$0Sep 7, 2021Final
Citation 1, item 7a
29 CFR 1926.501(a)(2) · Fall protection in construction
Serious$625$1,000Sep 7, 2021Final
Citation 1, item 7b
29 CFR 1926.501(b)(15) · Fall protection in construction
Serious$1,000$0Sep 7, 2021Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.453 · Aerial lifts

29 CFR 1926.453(b)(2)(iv)

(iv) Employees shall always stand firmly on the floor of the basket, and shall not sit or climb on the edge of the basket or use planks, ladders, or other devices for a work position.

29 CFR 1926.454 · Scaffold training

29 CFR 1926.454(a)

(a) The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable:

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(a)(2)

(2) The employer shall determine if the walking/working surfaces on which its employees are to work have the strength and structural integrity to support employees safely. Employees shall be allowed to work on those surfaces only when the surfaces have the requisite strength and structural integrity.

29 CFR 1926.503 · Fall protection training in construction

Other industrial design services employers in South Carolina

Alert subscribers get notified of each newly cited employer in South Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.