OSHA SearchOSHA records by employer

Dyco Manufacturing, Inc.: OSHA inspections and violations

Mont Pelier, Ohio · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999

2inspections
2citation items
$4,000current penalties
Jun 22, 2021last inspection

Dyco Manufacturing, Inc. has 2 OSHA inspections on record in Ohio, the first in 1984.

OSHA's last visit started on Jun 22, 2021 on a referral, in Montpelier.

Across those inspections OSHA issued 2 citation items: 2 serious.

OSHA proposed $6,827 in penalties. After settlements and reviews the total is $4,000, down 41%.

Most often, OSHA cited 1910.147, lockout/tagout (2 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Dyco Manufacturing, Inc. averages $4,000 over 1 cited inspection in that time.

Dyco Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 2 severe injuries to OSHA since 2015.

Dyco Manufacturing, Inc.: OSHA citation items per year, 1984 to 2021
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

265employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Dyco Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345377261 OPENED JUN 22, 2021Closed

Referral · Partial · Safety · 27 employees at the site · Closed Jan 12, 2022

12708 State Route 576, Montpelier, OH 43543 · All Other Miscellaneous Fabricated Metal Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jun 14, 2021: Employee suffers fingertip amputation while bending metal pa

At 12:30 p.m. on June 14, 2021, Employee #1 was bending metal parts on the LVD #181 press brake. After completing the first bend, the employee repositioned the part for a second bend and held onto it as the machine engaged. During the bending operation, the employee's right thumb was pinched between the part and the front side of the press brake, resulting in a partial fingertip amputation. The metal part was approximately 1.5 inches wide, and additional safeguarding methods, such as using a tool to maintain hand clearance from the point of operation, were not in place at the time. The incident occurred indoors and was not weather-related. The employee was treated without hospitalization.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$6,827$4,000Sep 15, 2021Final
Citation 1, item 1b
29 CFR 1910.147(d) · Lockout/tagout
Serious$0$0Sep 15, 2021Final

Inspection 1298181 OPENED AUG 22, 1984Closed

Planned · No inspection · Safety · 6 employees at the site · Closed Aug 27, 1984

Route 1, Mont Pelier, OH 43543 · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Montpelier site logged 1 recordable injury or illness among about 36 workers: 2.6 per 100 full-time workers, against a median of 4.0 for its industry. Those cases cost 3 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Dyco Manufacturing, INC
Montpelier · 2025
36 112.64.0

Included with any plan: 5 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Jun 14, 2021, Montpelier: Amputation · amputations · finger(s), fingernail(s), unspecified

On June 14, 2021, an employee was operating a CNC brake press. The employee was holding a part while making a second bend when their thumb was pinched between the side of the machine and the part being bent. The employee sustained a partial amputation to the thumb.

Jul 23, 2020, Montpelier: Amputation · amputations · fingertip(s)

An employee was bending a part in a hydraulic press brake. The employee's right middle finger was pinched between the part and the machine (not at the point of operation), causing a partial fingertip amputation.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(7)(i)

(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

Other all other miscellaneous fabricated metal product manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.