E.T. Gresham Co. Inc.: OSHA inspections and violations

29 CFR 1910.1200 · Hazard communication

29 CFR 1910.1200(g)(8)

(8) The employer shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s). (Electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.)

29 CFR 1910.180 · Crawler locomotive and truck cranes

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(iii)

(iii) Special handtools for placing and removing material shall be such as to permit easy handling of material without the operator placing a hand in the danger zone. Such tools shall not be in lieu of other guarding required by this section, but can only be used to supplement protection provided.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.22 · General requirements

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.252 · Welding fire safety

29 CFR 1910.26 · Portable metal ladders

29 CFR 1926.100 · Hard hats in construction

29 CFR 1926.1052 · Stairways in construction

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1416 · Operational aids

29 CFR 1926.150 · Fire protection

29 CFR 1926.152 · Flammable liquids

29 CFR 1926.25 · Housekeeping

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.302 · Power-operated hand tools

29 CFR 1926.34 · Means of egress

29 CFR 1926.350 · Gas welding and cutting

29 CFR 1926.403 · Electrical equipment on job sites

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.416 · Electrical safety in construction

29 CFR 1926.450 · Scope, application and definitions applicable to this subpart

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.50 · Medical services and first aid

29 CFR 1926.500 · Scope, application, and definitions applicable to this subpart

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.502 · Fall protection systems

29 CFR 1926.550 · [Reserved]

29 CFR 1926.552 · Material hoists, personnel hoists, and elevators

29 CFR 1926.601 · Motor vehicles

29 CFR 1926.602 · Earthmovers and forklifts in construction

29 CFR 1926.62 · Lead in construction

29 CFR 1926.706 · Requirements for masonry construction