Inspection 346586688 OPENED MAR 23, 2023Closed
429 S Memory Ln, Marshall, TX 75670 · Support Activities for Rail Transportation · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
OSHA has inspected Efg Composites MT, LLC 2 times in Texas since 2022.
The latest one began on Mar 23, 2023 on a referral, in Marshall.
Those inspections ended with 4 citation items: 3 serious and 1 other-than-serious.
Penalties were first proposed at $32,814 and now stand at $13,126, 60% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Efg Composites MT, LLC averages $13,126 (1 cited inspection).
1 inspection on this page followed a fatal incident.
Efg Composites MT, LLC also files yearly injury logs with OSHA, summarized below.
Texas · latest 90 days of OSHA records
394employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Texas
Checking a subcontractor, a client or your own company? Watch Efg Composites MT, LLC and get notified the morning OSHA posts a new citation for it.
Watch this company429 S Memory Ln, Marshall, TX 75670 · Support Activities for Rail Transportation · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
429 S Memory Ln, Marshall, TX 75670 · Railroad Rolling Stock Manufacturing · OSHA's record · Phone and website on Google Maps
Incident on Dec 29, 2022 (fatal): Employee is killed while operating milling machine
At 10:00 a.m. on December 29, 2022, an employee was using spanner wrench to tighten the bit he had installed into the chuck of the Kasuga milling machine. The chuck of the milling machine was free spinning and not allowing the employee to tighten the bit properly. As the employee held the spanner wrench with his right hand; he reached up to apply the brake lever with his left hand. At that instant the machine unexpectedly started, and the chuck spun rapidly with the spanner wrench still on it. The spanner wrench was thrown from the spinning chuck and struck the employee handle first approximately in the center of his chest creating a puncture that ultimately resulted in his death.
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1a 29 CFR 1910.147(c)(3)(i) · Lockout/tagout |
Serious | $9,376 | $5,626 | May 24, 2023 | Final |
| Citation 1, item 1b 29 CFR 1910.147(c)(4)(i) · Lockout/tagout |
Serious | $10,938 | $0 | May 24, 2023 | Final |
| Citation 1, item 3 29 CFR 1910.212(a)(3)(i) · Machine guarding |
Serious | $10,938 | $6,563 | May 24, 2023 | Final |
| Citation 2, item 1 29 CFR 1904.40(a) · Giving injury records to OSHA |
Other-than-serious | $1,562 | $937 | May 24, 2023 | Final |
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Marshall site logged 2 recordable injuries or illnesses among about 30 workers: 16.9 per 100 full-time workers, against a median of 1.6 for its industry.
| Site and year | Workers | Cases | Days-away cases | Rate | Industry median |
|---|---|---|---|---|---|
| EFG Composites MT LLC Marshall · 2022 | 30 | 2 | 0 | 16.9 | 1.6 |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.40(a)
(a) Basic requirement. When an authorized government representative asks for the records you keep under part 1904, you must provide copies of the records within four (4) business hours.
29 CFR 1910.147(c)(3)(i)
(3) Full employee protection. (i) When a tagout device is used on an energy isolating device which is capable of being locked out, the tagout device shall be attached at the same location that the lockout device would have been attached, and the employer shall demonstrate that the tagout program will provide a level of safety equivalent to that obtained by using a lockout program.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.