OSHA SearchOSHA records by employer

Fast Tire: OSHA inspections and violations

Ankeny, Iowa · General Automotive Repair · NAICS 811111

1inspections
13citation items
$22,834current penalties
Jan 22, 2024last inspection

Fast Tire has one OSHA inspection on record in Iowa.

OSHA opened it on Jan 22, 2024 after a complaint, in Ankeny.

From that inspection OSHA issued 13 citation items: 6 serious and 7 other-than-serious.

OSHA proposed $36,835 in penalties. After settlements and reviews the total is $22,834, down 38%.

Most often, OSHA cited 1910.305, electrical wiring methods (5 items).

For context, across all repair and personal services employers the median penalty per cited inspection since 2015 is $1,200. Fast Tire averages $22,834 over 1 cited inspection in that time.

Fast Tire: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

69employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Fast Tire and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347232266 OPENED JAN 22, 2024Closed

Complaint · Partial · Safety · 4 employees at the site · Closed Oct 22, 2025

801 East 1st Street, Ankeny, IA 50021 · General Automotive Repair · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 88.4 - CODE OF IOWA (2021)
Other-than-serious$8,372$4,186May 23, 2024Final
Citation 1, item 2a
29 CFR 1910.22(a)(3) · Walking-working surfaces
Serious$6,697$3,350May 23, 2024Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$8,372$2,675May 23, 2024Final
Citation 1, item 3b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$2,675May 23, 2024Final
Citation 1, item 4
29 CFR 1910.243(b)(2) · Guarding of portable powered tools
Other-than-serious$5,022$3,250May 23, 2024Final
Citation 1, item 5b
29 CFR 1910.253(b)(4)(iii) · Gas welding and cutting
Other-than-serious$0$837May 23, 2024Final
Citation 1, item 5c
29 CFR 1910.253(b)(5)(ii)(d) · Gas welding and cutting
Serious$0$837May 23, 2024Final
Citation 1, item 5d
29 CFR 1910.253(e)(6)(ii) · Gas welding and cutting
Other-than-serious$0$837May 23, 2024Final
Citation 1, item 6a
29 CFR 1910.305(b)(1)(i) · Electrical wiring methods
Other-than-serious$8,372$837May 23, 2024Final
Citation 1, item 6b
29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods
Other-than-serious$0$837May 23, 2024Final
Citation 1, item 6c
29 CFR 1910.305(b)(2)(i) · Electrical wiring methods
Serious$0$837May 23, 2024Final
Citation 1, item 6d
29 CFR 1910.305(g)(2)(ii) · Electrical wiring methods
Other-than-serious$0$837May 23, 2024Final
Citation 1, item 6e
29 CFR 1910.305(j)(1)(i) · Electrical wiring methods
Serious$0$837May 23, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(1)(i)

(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.22(a)(3)

(3) Walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice.

29 CFR 1910.243 · Guarding of portable powered tools

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.305 · Electrical wiring methods

Other general automotive repair employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.