Milford Center, Ohio · Lumber, Plywood, Millwork, and Wood Panel Merchant Wholesalers · NAICS 423310
1inspections
3citation items
$23,439current penalties
Sep 21, 2023last inspection
OSHA has inspected Forum Works LLC once in Ohio.
The inspection began on Sep 21, 2023 on a referral, in Milford Center.
That inspection ended with 3 citation items: 3 serious.
Penalties were first proposed at $23,439 and still stand at $23,439.
Lockout/tagout comes up most often in these citations: 3 items under 1910.147.
How that compares: the median penalty per cited inspection for wholesale employers since 2015 is $3,425, and Forum Works LLC averages $23,439 (1 cited inspection).
Forum Works LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
265employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Milford Center site logged 2 recordable injuries or illnesses among about 27 workers: 6.7 per 100 full-time workers, against a median of 3.3 for its industry. Those cases cost 13 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Forum Works, LLC
Milford Center · 2019
27
2
1
6.7
3.3
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Sep 14, 2023, Milford Center: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
An employee was clearing debris on a panel saw. Once the debris was cleared, the saw traversed on a carriage back to its original location and struck the employee's midsection. The employee sustained blunt force trauma resulting in broken ribs and a collapsed lung.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(d)
(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:
Other lumber, plywood, millwork, and wood panel merchant wholesalers employers in Ohio
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.