OSHA SearchOSHA records by employer

FTG 1 LLC: OSHA inspections and violations

Kernersville, North Carolina · Other Construction Material Merchant Wholesalers · NAICS 423390

1inspections
3citation items
$4,000current penalties
Aug 27, 2024last inspection

OSHA inspectors have visited FTG 1 LLC in North Carolina one time.

It opened on Aug 27, 2024 as a planned inspection, in Kernersville.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $6,000; today they stand at $4,000, 33% less.

Among wholesale employers, the typical cited inspection since 2015 ends with a $3,425 penalty. FTG 1 LLC averages $4,000 across 1 cited inspection.

FTG 1 LLC: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

237employers cited

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch FTG 1 LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347714875 OPENED AUG 27, 2024Closed

Planned · Partial · Safety · 7 employees at the site · Closed May 27, 2025

111- F Gralin Road, Kernersville, NC 27284 · Other Construction Material Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$2,000$1,400Oct 22, 2024Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$2,000$1,400Oct 22, 2024Final
Citation 1, item 3
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
 Serious$2,000$1,200Oct 22, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(f)(3)

(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.

Other other construction material merchant wholesalers employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.