OSHA has inspected G3 Industries, Inc. 6 times in Wisconsin since 2015.
The latest one began on Feb 2, 2022 after a complaint, in Kronenwetter.
Those inspections ended with 11 citation items: 9 serious, 1 repeat and 1 other-than-serious.
Penalties were first proposed at $71,080 and now stand at $41,370, 42% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 7 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and G3 Industries, Inc. averages $8,274 (5 cited inspections).
G3 Industries, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 6 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Incident on Feb 28, 2019: Employee amputates finger in vacuum ejector
At 7:40 a.m. on February 28, 2019, an employee was running a CNC lathe and unloading parts from the vacuum ejector. The employee attempted to move a finished part into the unloader table when the next part pinched the employee's finger against the tube, resulting in an amputation of the left index finger. index finger.
Incident on Apr 5, 2018: Employee struck by machine and is hospitalized from blunt fo
At 8:40 p.m. on April 5, 2018, an employee was operating the 906 Autobender machine while standing next to the tension arm and used a hydraulic wire cutter to cut a wire that was jammed. When the employee cut the wire, it swung towards the machine and the tension arm moved away from the coil, striking the employee on the right side of his torso. The employee was hospitalized with blunt force trauma to his upper ribs on his right side.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Mosinee site logged 6 recordable injuries or illnesses among about 136 workers: 4.6 per 100 full-time workers, against a median of 3.3 for its industry. Those cases cost 6 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
G3 Industries, Inc.
Mosinee · 2024
136
6
2
4.6
3.3
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was working on a resistance welder. The welder activated, and a copper pin on it caused an amputation to the employee's left middle finger.
An employee depressed the foot pedal on an air bending machine to bend parts. He rested his left hand on the area where the arm meets the bending roller, which controls the bending arm. When he released the foot pedal, the bending arm automatically returned to home position and his left thumb was pinched between the arm and the bending roller. His left thumb tip was amputated as a result.
A technician was troubleshooting a multi-spindle CNC lathe which is used for metalworking. The technician was manually spinning the spindle which causes the belt and pully to spin. The injured employee s hand became caught in the machine resulting in an amputation to the left index finger.
An employee was operating a lathe with a vacuum ejector. The part being ejected got caught in the unloader tube; as the employee was removing it, the employee's left index finger was caught between the ejector tube and the next part. The finger was amputated.
Apr 5, 2018, Mosinee: Hospitalization · fractures and other injuries, n.e.c. · chest, except internal location of diseases or disorders
An employee was operating a spring forming machine to cut a compressed piece of wire when a piece of metal flew and struck the employee's chest. The employee suffered broken ribs and internal organ damage that required hospitalization.
An employee was loading bar stock into the lathe when the bar stock became jammed. While he attempted to clear the jam, the energized clamp came down and pinched his finger, resulting in a right ring fingertip amputation (no bone).
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)(b)
(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;
29 CFR 1910.147(c)(7)(i)(a)
(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.