OSHA SearchOSHA records by employer

Gallito Welder Orl. LLC: OSHA inspections and violations

Orlando, Florida · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · NAICS 811310

2inspections
7citation items
$18,470current penalties
Jun 3, 2020last inspection

Gallito Welder Orl. LLC has 2 OSHA inspections on record in Florida, the first in 2019.

OSHA's last visit started on Jun 3, 2020 to follow up on an earlier case, in Orlando.

Across those inspections OSHA issued 7 citation items: 6 serious and 1 other-than-serious.

OSHA proposed $26,331 in penalties. After settlements and reviews the total is $18,470, down 30%.

Most often, OSHA cited 1910.253, gas welding and cutting (3 items).

For context, across all repair and personal services employers the median penalty per cited inspection since 2015 is $1,200. Gallito Welder Orl. LLC averages $18,470 over 1 cited inspection in that time.

1 inspection on this page followed a fatal incident.

Gallito Welder Orl. LLC: OSHA citation items per year, 2019 to 2020
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

319employers cited

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch Gallito Welder Orl. LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344771977 OPENED JUN 3, 2020Closed

Follow-up · Partial · Safety · 1 employee at the site · Closed Jun 9, 2020

707 W. Taft Vineland Rd., Orlando, FL 32801 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 343920724 OPENED APR 10, 2019Closed

Fatality or catastrophe · Complete · Safety · 4 employees at the site · Closed May 29, 2024

203 W. Taft Vineland Rd., Orlando, FL 32801 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps

Incident on Apr 8, 2019 (fatal): Welder is killed when crushed by trailer axle

At 2:00 p.m. on April 8, 2019, a welder was tasked with removing the rear axle from an open car carrier trailer. Before cutting the axle loose from the trailer with a torch, the welder supported the axle with a 0.25 inch steel wire attached to a chain hoist. Once the welder completed the cut, the weight of the axel broke the 0.25 inch steel wire. The welder was killed when the axle crushed him. axle crushed him.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$13,260$11,934Oct 7, 2019Final
Citation 1, item 2
29 CFR 1910.178(l)(6) · Forklifts and other powered industrial trucks
Serious$2,273$1,136Oct 7, 2019Final
Citation 1, item 3a
29 CFR 1910.253(b)(2)(ii) · Gas welding and cutting
Serious$3,978$1,989Oct 7, 2019Final
Citation 1, item 3b
29 CFR 1910.253(b)(2)(iv) · Gas welding and cutting
Serious$0$0Oct 7, 2019Final
Citation 1, item 3c
29 CFR 1910.253(b)(4)(iii) · Gas welding and cutting
Serious$0$0Oct 7, 2019Final
Citation 1, item 4
29 CFR 1910.254(d)(9)(iii) · Arc welding and cutting
Serious$3,978$1,989Oct 7, 2019Final
Citation 2, item 1
29 CFR 1904.39(a)(1) · Reporting deaths and severe injuries
Other-than-serious$2,842$1,421Oct 7, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1904.39(a)(1)

(a) Basic requirement. (1) Within eight (8) hours after the death of any employee as a result of a work-related incident, you must report the fatality to the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.178 · Forklifts and other powered industrial trucks

29 CFR 1910.178(l)(6)

(6) Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.254 · Arc welding and cutting

Other commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.