OSHA SearchOSHA records by employer

Gibraltar Fabrication, LLC: OSHA inspections and violations

Burnet, Texas · Iron and Steel Pipe and Tube Manufacturing from Purchased Steel · NAICS 331210

1inspections
5citation items
$7,724current penalties
Oct 20, 2020last inspection

OSHA inspectors have visited Gibraltar Fabrication, LLC in Texas one time.

It opened on Oct 20, 2020 after a fatality or catastrophe, in Burnet.

In all, OSHA issued 5 citation items: 4 serious and 1 other-than-serious.

The proposed penalties came to $19,310; today they stand at $7,724, 60% less.

The rule cited most here is 1910.1053 (silica dust in general industry), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Gibraltar Fabrication, LLC averages $7,724 across 1 cited inspection.

Gibraltar Fabrication, LLC also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Gibraltar Fabrication, LLC: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

401employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Gibraltar Fabrication, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344987193 OPENED OCT 20, 2020Closed

Fatality or catastrophe · Partial · Safety · 170 employees at the site · Closed May 24, 2021

3200 Texas 29, Burnet, TX 78611 · Iron and Steel Pipe and Tube Manufacturing from Purchased Steel · OSHA's record · Phone and website on Google Maps

Incident on Oct 18, 2020: Four employees sustain injuries when struck by falling steel

At 2:45 p.m. on October 18, 2020, four employees were working for a contractor that was constructing a 30-foot border wall between the United States and Mexico. The employees were conducting abrasive blasting operations when a steel panel fell and struck them. The hoisting hardware on the hoist lifting the panel had failed. Employee #1 sustained a partial foot amputation, Employee #2 sustained back injuries, Employee #3 sustained back and abdomen injuries and Employee #4 sustained shoulder and upper arms injuries. All four employees were hospitalized as a result of their injuries.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
OSH Act Section 5(a)(1) · General Duty Clause
Serious$12,288$4,915Apr 7, 2021Final
Citation 1, item 2a
29 CFR 1910.1053(d)(1) · Silica dust in general industry
Serious$7,022$2,809Apr 7, 2021Final
Citation 1, item 2b
29 CFR 1910.1053(f)(2)(i) · Silica dust in general industry
Serious$0$0Apr 7, 2021Final
Citation 1, item 2c
29 CFR 1910.1053(i)(1)(i) · Silica dust in general industry
Serious$0$0Apr 7, 2021Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$0$0Apr 7, 2021Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2024, the Burnet site logged 7 recordable injuries or illnesses among about 66 workers: 8.3 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 68 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Gibraltar Fabrication LLC
Burnet · 2024
66 718.33.6
Gibraltar Fabrication, LLC
Burnet · 2021
30 10229.12.4

Included with any plan: 2 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 23, 2020, Burnet: Hospitalization · bruises, contusions · upper and lower limb(s)

An employee had finished welding on a panel. A forklift lifted the product and steel tubing broke from the assembly, bounced off the concrete, and struck the employee, knocking him to the ground. The employee sustained contusions/bruising to the left arm and leg muscle.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1053 · Silica dust in general industry

29 CFR 1910.1053(d)(1)

(d) Exposure assessment—(1) General. The employer shall assess the exposure of each employee who is or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2) or the scheduled monitoring option in paragraph (d)(3) of this section.

29 CFR 1910.1053(f)(2)(i)

(2) Written exposure control plan. (i) The employer shall establish and implement a written exposure control plan that contains at least the following elements:

29 CFR 1910.1053(i)(1)(i)

(i) Medical surveillance—(1) General. (i) The employer shall make medical surveillance available at no cost to the employee, and at a reasonable time and place, for each employee who will be occupationally exposed to respirable crystalline silica at or above the action level for 30 or more days per year.

29 CFR 1910.132 · Personal protective equipment, general requirements

OSH Act Section 5 · General Duty Clause

Other iron and steel pipe and tube manufacturing from purchased steel employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.