Since 2009, OSHA inspectors have visited Gibraltar Packaging Inc. in Nebraska 3 times.
The most recent inspection opened on Apr 21, 2021 on a referral, in Hastings.
In all, OSHA issued 11 citation items: 9 serious and 2 other-than-serious.
The proposed penalties came to $29,969; today they stand at $17,800, 41% less.
The rule cited most here is 1910.305 (electrical wiring methods), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Gibraltar Packaging Inc. averages $5,500 across 2 cited inspections.
Gibraltar Packaging Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Nebraska · latest 90 days of OSHA records
33employers cited
Get notified the morning OSHA posts each new citation in Nebraska: the employer, the site address, the rules broken and the penalty.
OSHA records show Gibraltar Packaging Inc. at 2 sites in 2 states. Together they've had 5 inspections and $41,500 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Apr 16, 2021: Employee clearing paper from slitter suffers amputation
At 6:30 a.m. on April 16, 2021, an employee was working for a firm that manufactured corrugated and solid fiber boxes. He was operating a Marquip Model III L Sheet Runner dual rotary precision sheeter. This machine had slitter blades that cut off excess paper when a roll of paper was wider than needed for a scheduled job. Occasionally, cut-off excess paper did not feed smoothly off the roll and bunched up. Employees would then reach into the running machine, within 5 in. (127 mm) of a slitter blade, to redirect the cut-off paper into the waste area. Although employees stated that they slowed the machine down prior to performing this task, their hands were near the rotating slitter blades. The slitter blades could be adjusted to various positions, depending on the width of the paper to be cut off from the roll. The blades were 12 in. (305 mm) from the top of the guard rail. In this incident, the employee had been clearing and redirecting the cut-off excess paper coming off the machine while the machine was running. He reached in with his right hand to remove paper. The employee had slowed the machine down before reaching in, but one of his fingers was pulled into the path of the slitter blade. The tip of the finger contacted the trim blade, and the employee suffered the amputation of the fingertip before the first knuckle. He was hospitalized. During an interview, the facility's environmental, health, and safety manager said that the sheeter was operated 24 hours a day, 7 days a week, but that the slitter was not always used. Sheeter jobs that required the use of the slitter occurred only two to four times per month, with each job lasting between 12 and 36 hours, depending on the size of the order. The sheeter had been in the facility since 2005, and the bunching problem had occurred for as long as the machine had been in use. Though trained to turn the machine off first, employees said that they normally corrected the bunching while the machine was running.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2016, the Hastings site logged 13 recordable injuries or illnesses among about 140 workers: 8.9 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 79 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Gibraltar Packaging
Hastings · 2016
140
13
4
8.9
2.1
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
An employee was trying to unjam waste paper in a paper slitter. The slicer blade amputated the employee's right index fingertip.
Nov 30, 2016, Hastings: Amputation · amputations · fingertip(s)
An employee was unjamming the core baler machine when the right hand was pulled into the core cutting nip. The employee suffered open fractures to the second, third and fourth digits on the right hand. Two days later the employee's middle fingertip was surgically amputated.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Implementation—(1) What do I need to do to complete the OSHA 300 Log? You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.303 · Electrical equipment, general requirements
Alert subscribers get notified of each newly cited employer in Nebraska the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.