Marshall, Minnesota · Other Millwork (including Flooring) · NAICS 321918
6inspections
20citation items
$8,405current penalties
Jul 29, 2024last inspection
Since 2000, OSHA inspectors have visited Grill Works Inc in Minnesota 6 times.
The most recent inspection opened on Jul 29, 2024 as a planned inspection, in Marshall.
In all, OSHA issued 20 citation items: 13 serious and 7 other-than-serious.
The proposed penalties came to $12,650; today they stand at $8,405, 34% less.
The rule cited most here is 1910.107 (spray painting and finishing), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Grill Works Inc averages $3,660 across 2 cited inspections.
Grill Works Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
373employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Marshall site logged 5 recordable injuries or illnesses among about 42 workers: 11.4 per 100 full-time workers, against a median of 4.6 for its industry. Those cases cost 134 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Grill Works Inc
Marshall · 2025
42
5
1
11.4
4.6
Grill Works Inc.
Marshall · 2023
42
4
2
9.2
4.6
Included with any plan: 3 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(iii) Waste and residue. Combustible waste material and residues in a building or unit operating area shall be kept to a minimum, stored in covered metal receptacles and disposed of daily.
(3) Floors. The floor surface of a spray booth and operator's working area, if combustible, shall be covered with noncombustible material of such character as to facilitate the safe cleaning and removal of residues.
29 CFR 1910.107(b)(5)(i)
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.