Since 2008, OSHA inspectors have visited Hamilton Parker Co. in Ohio 3 times.
The most recent inspection opened on May 13, 2016 on a referral, in Delaware.
In all, OSHA issued 6 citation items: 4 serious and 2 other-than-serious.
The proposed penalties came to $27,488; today they stand at $14,752, 46% less.
The rule cited most here is 1910.213 (woodworking machinery), 2 times.
Among retail employers, the typical cited inspection since 2015 ends with a $1,750 penalty. Hamilton Parker Co. averages $7,218 across 2 cited inspections.
Hamilton Parker Co. also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Columbus site logged 4 recordable injuries or illnesses among about 112 workers: 4.0 per 100 full-time workers, against a median of 4.5 for its industry. Those cases cost 80 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hamilton Parker Company, LLC
Columbus · 2025
112
4
2
4.0
4.5
Hamilton Parker Company
Columbus · 2016
116
4
2
3.5
4.5
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 4 reports on file.
Oct 27, 2025, Columbus: Hospitalization · fractures · foot(feet) and leg(s) n.e.c.
The injured employee was walking through the warehouse. Another associate was driving a forklift with a pallet of large format tile (slabs) when the slabs began to tip. The injured employee ran over to stop the slabs from falling, but the slabs fell on his lower left leg/foot. The employee sustained fractures in his lower leg and foot. He was hospitalized and required surgery.
Aug 3, 2023, Delaware: Amputation · amputations · fingertip(s)
An employee was using a router table to cut a piece of wood. While pushing the wood through the machine, the wood caught and pulled his hand into the bit resulting in amputation of the middle fingertip on the right hand above the first knuckle.
May 5, 2016, Delaware: Amputation · amputations · fingernail(s), nailbed(s)
An employee was cutting a piece of wood on the table saw and caught the side of his thumb on the saw blade amputating the left thumb nail. The employee was hospitalized.
On 5/14/15, at approximately 2:20 p.m., an employee was moving a box of tile off a forklift. The box fell and caught the employee's right ring finger between the box and the pallet, amputating the ring finger of his right hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(b) Implementation—(1) What do I need to do to complete the OSHA 300 Log? You must enter information about your business at the top of the OSHA 300 Log, enter a one or two line description for each recordable injury or illness, and summarize this information on the OSHA 300-A at the end of the year.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(1)(ii)
(ii) Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).
(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.