Hawker Powersource, Inc. has 4 OSHA inspections on record in Tennessee, the first in 1998.
OSHA's last visit started on May 28, 2021 on a referral, in Ooltewah.
Across those inspections OSHA issued 15 citation items: 6 serious and 9 other-than-serious.
OSHA proposed $23,125 in penalties and the amount has not been reduced.
Most often, OSHA cited 1910.1025, lead in general industry (9 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Hawker Powersource, Inc. averages $7,642 over 3 cited inspections in that time.
Hawker Powersource, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Tennessee · latest 90 days of OSHA records
344employers cited
Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.
Incident on May 26, 2021: Employee's fingers are amputated by mixer blade while taking
At 5:00 p.m. on May 26, 2021, an employee was manually taking a sample of "paste" from a mixer for an impurity test. The employee reached through an opening on the back side of the mixer and was struck by the mixer blade. The incident resulted in total amputation of the right hand middle finger and partial amputation of the right hand ring finger. The employee was hospitalized for treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Ooltewah site logged 8 recordable injuries or illnesses among about 123 workers: 6.6 per 100 full-time workers, against a median of 1.5 for its industry. Those cases cost 7 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hawker Powersource
Ooltewah · 2022
123
8
3
6.6
1.5
Included with any plan: 6 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(iii) If the initial monitoring reveals that employee exposure is above the permissible exposure limit the employer shall repeat monitoring quarterly. The employer shall continue monitoring at the required frequency until at least two consecutive measurements, taken at least 7 days apart, are below the PEL but at or above the action level at which time the employer shall repeat monitoring for that employee at the frequency specified in paragraph (d)(6)(ii), except as otherwise provided in paragraph (d)(7) of this section.
29 CFR 1910.1025(e)(1)(i)
(e) Methods of compliance—(1) Engineering and work practice controls. (i) Where any employee is exposed to lead above the permissible exposure limit for more than 30 days per year, the employer shall implement engineering and work practice controls (including administrative controls) to reduce and maintain employee exposure to lead in accordance with the implementation schedule in Table I below, except to the extent that the employer can demonstrate that such controls are not feasible. Wherever the engineering and work practice controls which can be instituted are not sufficient to reduce employee exposure to or below the permissible exposure limit, the employer shall nonetheless use them to reduce exposures to the lowest feasible level and shall supplement them by the use of respiratory protection which complies with the requirements of paragraph (f) of this section.
29 CFR 1910.1025(e)(3)(ii)(a)
(A) A description of each operation in which lead is emitted; e.g. machinery used, material processed, controls in place, crew size, employee job responsibilities, operating procedures and maintenance practices;
Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.