OSHA SearchOSHA records by employer

High & DRY Dehydrators LLC: OSHA inspections and violations

Coloma, Wisconsin · Dried and Dehydrated Food Manufacturing · NAICS 311423

1inspections
4citation items
$8,257current penalties
Jun 26, 2017last inspection

High & DRY Dehydrators LLC has one OSHA inspection on record in Wisconsin.

OSHA opened it on Jun 26, 2017 on a referral, in Coloma.

From that inspection OSHA issued 4 citation items: 4 serious.

OSHA proposed $13,761 in penalties. After settlements and reviews the total is $8,257, down 40%.

Most often, OSHA cited 1910.147, lockout/tagout (3 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,875. High & DRY Dehydrators LLC averages $8,257 over 1 cited inspection in that time.

High & DRY Dehydrators LLC also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

High & DRY Dehydrators LLC: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

229employers cited

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch High & DRY Dehydrators LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342428612 OPENED JUN 26, 2017Closed

Referral · Partial · Safety · 25 employees at the site · Closed Jan 24, 2018

251 Industrial Drive, Coloma, WI 54930 · Dried and Dehydrated Food Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Jun 19, 2017: Employee catches finger between wrench and metal frame, part

At 6:30 a.m. on June 19, 2017, an employee replacing a bearing on tilt belt 4 for a flume that was not in use. The employee was using a hand wrench to perform the replacement. The cross belt caught the wrench which caused it to smash the employee's right pinky finger against the metal frame. The employee suffered a partial amputation of his right pinky finger. The employee was not hospitalized. hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
Serious$3,621$2,173Jul 28, 2017Final
Citation 1, item 2a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$5,070$3,042Jul 28, 2017Final
Citation 1, item 2b
29 CFR 1910.147(d)(4)(i) · Lockout/tagout
Serious$0$0Jul 28, 2017Final
Citation 1, item 3 Serious$5,070$3,042Jul 28, 2017Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2024, the Coloma site logged 2 recordable injuries or illnesses among about 21 workers: 11.9 per 100 full-time workers, against a median of 3.4 for its industry. Those cases cost 32 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
High and Dry Dehydrators LLC
Coloma · 2024
21 2111.93.4

Included with any plan: 2 more yearly logs from these sites, back to 2022, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jun 19, 2017, Coloma: Amputation · amputations · finger(s), fingernail(s), unspecified

An employee was changing the bearing on a tilt belt when the employee's right hand contacted the belt, partially amputating the pinky finger. The belt was operating at the time.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(4)(ii)(b)

(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;

29 CFR 1910.147(d)(4)(i)

(4) Lockout or tagout device application. (i) Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees.

29 CFR 1910.28 · Fall protection in general industry

Other dried and dehydrated food manufacturing employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.