Inspection 346394364 OPENED DEC 16, 2022Closed
500 Mo-94, Holts Summit, MO 65043 · Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
Since 2020, OSHA inspectors have visited Hitachi Abb in Missouri 2 times.
The most recent inspection opened on Dec 16, 2022 to follow up on an earlier case, in Holts Summit.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $40,959; today they stand at $32,767, 20% less.
The rule cited most here is 1910.179 (overhead and gantry cranes), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Hitachi Abb averages $32,767 across 1 cited inspection.
It reported 1 severe injury to OSHA since 2015.
Want to know if OSHA cites Hitachi Abb again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this companyInspection history
Inspection 345040059 OPENED NOV 24, 2020Closed
500 Mo-94, Holts Summit, MO 65043 · Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.179(j)(2)(vi) · Overhead and gantry cranes |
Serious | $13,653 | $10,922 | Feb 12, 2021 | Final |
| Citation 1, item 2 29 CFR 1910.179(l)(1) · Overhead and gantry cranes |
Serious | $13,653 | $10,922 | Feb 12, 2021 | Final |
| Citation 1, item 3 29 CFR 1910.179(m)(1) · Overhead and gantry cranes |
Serious | $13,653 | $10,922 | Feb 12, 2021 | Final |
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Nov 20, 2020, Holts Summit: Hospitalization · internal injuries to organs and blood vessels of the trunk · chest, except internal location of diseases or disorders
At about 8:00 p.m. on November 20, 2020, an employee was using a crane to remove product from a racking system. A cable broke and the crane tipped forward, ejecting the employee. The employee flew about 10-12 feet into the air, then fell to the concrete floor. The employee suffered two broken ribs, a broken collarbone, a broken tailbone, a punctured lung, and lacerations that required suturing.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.179 · Overhead and gantry cranes
29 CFR 1910.179(j)(2)(vi)
(vi) All functional operating mechanisms for excessive wear of components.
29 CFR 1910.179(l)(1)
(l) Maintenance—(1) Preventive maintenance. A preventive maintenance program based on the crane manufacturer's recommendations shall be established.
29 CFR 1910.179(m)(1)
(m) Rope inspection—(1) Running ropes. A thorough inspection of all ropes shall be made at least once a month and a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier for the ropes which were inspected shall be kept on file where readily available to appointed personnel. Any deterioration, resulting in appreciable loss of original strength, shall be carefully observed and determination made as to whether further use of the rope would constitute a safety hazard. Some of the conditions that could result in an appreciable loss of strength are the following:
Other capacitor, resistor, coil, transformer, and other inductor manufacturing employers in Missouri
- Electro-Core Inc. Washington · 40 citations · $28,177
- Milbank Manfacturing Concordia · 1 citation · $11,271
- MMT Technology, Inc Garden City · 6 citations · $13,689
- Ecircuits Blue Springs · 2 citations · $3,430
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.