Since 2015, OSHA inspectors have visited Howard Precision, Inc. in New Hampshire 2 times.
The most recent inspection opened on Aug 9, 2018 on a referral, in Gilford.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $4,400; today they stand at $3,600, 18% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Howard Precision, Inc. averages $3,600 across 1 cited inspection.
Howard Precision, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
New Hampshire · latest 90 days of OSHA records
52employers cited
Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.
Incident on Aug 9, 2018: Employee amputates arm when pulled against lathe
At 10:15 a.m. on August 9, 2018, an employee was polishing a part on lathe and his glove wrapped around the part, pulling his left arm into the lathe. The employee amputated his arm at the elbow and was hospitalized.
No citations from this inspection.
Inspection 340175447 OPENED JAN 13, 2015Closed
Referral · Partial · Safety · 15 employees at the site · Closed Jun 10, 2016
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2023, the Gilford site logged 1 recordable injury or illness among about 17 workers: 11.5 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Howard Precision Inc
Gilford · 2023
17
1
1
11.5
2.7
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Aug 9, 2018, Gilford: Hospitalization, amputation · amputations · forearm(s)
An employee was polishing a part on a lathe with sandpaper when the glove she was wearing was caught on the part and pulled her left arm into the lathe, resulting in a left arm amputation at the elbow.
Jan 9, 2015, Gilford: Amputation · amputations · fingertip(s)
An employee amputated a finger tip while using a band saw.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(1)(ii)
(ii) Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.