OSHA has inspected Hunt Forest Products, LLC 11 times in Louisiana since 1998.
The latest one began on Apr 22, 2025 after a fatality or catastrophe, in Pollock.
Those inspections ended with 8 citation items: 7 serious and 1 repeat.
Penalties were first proposed at $69,000 and now stand at $62,460, 9% lower after settlements or reviews.
Working near live electrical parts comes up most often in these citations: 2 items under 1910.333.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Hunt Forest Products, LLC averages $24,825 (2 cited inspections).
2 inspections on this page followed a fatal incident.
Hunt Forest Products, LLC also files yearly injury logs with OSHA, summarized below.
It reported 6 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Louisiana · latest 90 days of OSHA records
19employers cited
Get notified the morning OSHA posts each new citation in Louisiana: the employer, the site address, the rules broken and the penalty.
Incident on Sep 23, 2024 (fatal): Employee is killed when caught between machine components du
At 3:45 p.m. on September 20, 2024, Employee #1, employed by a manufacturing facility, was preparing for the warm-up of the spread line machine for booth one. While engaged in maintenance operations, the employee was in the process of changing a glue nozzle on the #1 spray booth. During the maintenance work, the employee fell onto a nearby flight chain and became pinned between the chain and the bottom of the spray booth. The employee sustained fatal injuries as a result of being caught between the machine components.
Incident on Apr 2, 2018: Employee working on fan sustains injuries when fan starts
At 11:00 a.m. on April 2, 2018, an employee was working for a wholesaler of lumber, plywood, millwork, and wood panels. He was performing maintenance work on the distribution fan for the Number 3 boiler. As he was removing and replacing the fan's drive belt, the fan started. His right hand became caught between the belt and sheave (pulley) of the distribution fan. He sustained the laceration of the middle and ring fingers on his right hand. He further sustained a fracture to the tip of the middle finger on his right hand. He was hospitalized.
No citations from this inspection.
Inspection 340604560 OPENED MAY 1, 2015Closed
Referral · Partial · Health · 250 employees at the site · Closed Jun 15, 2015
Incident on Jun 16, 2008 (fatal): Employee is struck by weed eater blade, later dies
On June 16, 2008, Employee #1 was using an Echo weed eater with a 10-in. circula r saw blade attached. Employee #1 was trimming in the wet storage yard when the blade came off the weed eater and struck him in the leg. Employee #1 was transpo rted to the hospital and pronounced dead at approximately 12:00 p.m. the same da y.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Pollock site logged 6 recordable injuries or illnesses among about 337 workers: 1.8 per 100 full-time workers, against a median of 3.9 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Hunt Forest Products, LLC - Pollock
Pollock · 2025
337
6
1
1.8
3.9
Hunt Forest Products, LLC
Ruston · 2025
50
0
0
0.0
3.9
Hunt Forest Products, LLC - Olla
Olla · 2025
32
2
2
6.0
4.2
Hunt Forest Products, LLC - Pollock
Olla · 2024
31
0
0
0.0
4.2
Hunt Forest Products, LLC
Pollock · 2021
300
6
1
2.2
3.9
Included with any plan: 3 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 6 reports on file.
May 13, 2023, Pollock: Hospitalization · fractures · lower leg(s)
An employee was changing out a lathe knife when it slipped out of his hands and struck his right shin. The employee sustained a laceration and tibia fracture.
An employee was using a cable winch to position a log. The tongs slipped off the log, and his right middle finger was crushed between the log and the chain, resulting in a partial amputation.
An employee was moving landscape timber. One of the timber cores fell off the loading table, crushing the employee's left little finger against the metal frame of the machine. The finger was later amputated.
An employee was inspecting fan belts and bearings. The employee's right middle finger was pinched between the belt and the sheave, causing the amputation of the fingertip.
An employee was breaking out a second employee at the banding station area. A unit of plywood came into the banding station and was automatically strapped but failed to completely clear the banding area of the machine. The first employee walked over and was using his left hand to push the unit out of the strapper when his left foot contacted an electronic eye that controls the sequencing of the…
A stack of plywood came out of a press machine and did not fully roll out onto the roller bed to be picked up by a forklift. An employee tried to manually complete the cycle on the machine to move the stack of plywood. The load of wood then smashed his hand, breaking his thumb and lacerating his hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178 · Forklifts and other powered industrial trucks
29 CFR 1910.178(l)(1)(i)
(l) Operator training. (1) Safe operation. (i) The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).
29 CFR 1910.178(p)(1)
(p) Operation of the truck. (1) If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(f)(3)
(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.
29 CFR 1910.23 · Guarding floor and wall openings and holes
Alert subscribers get notified of each newly cited employer in Louisiana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.