OSHA SearchOSHA records by employer

Imnermountain Construction: OSHA inspections and violations

Peru, Vermont · Siding Contractors · NAICS 238170

1inspections
4citation items
$10,230current penalties
Mar 25, 2019last inspection

OSHA inspectors have visited Imnermountain Construction in Vermont one time.

It opened on Mar 25, 2019, in Peru.

In all, OSHA issued 4 citation items: 4 serious.

The proposed penalties came to $13,640; today they stand at $10,230, 25% less.

Among construction employers, the typical cited inspection since 2015 ends with a $3,078 penalty. Imnermountain Construction averages $10,230 across 1 cited inspection.

Imnermountain Construction: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Want to know if OSHA cites Imnermountain Construction again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 343875951 OPENED MAR 25, 2019Closed

Programmed other · Partial · Safety · 5 employees at the site · Closed Sep 22, 2023

Willows Way, Peru, VT 05152 · Siding Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$3,410$3,410May 10, 2019Final
Citation 1, item 2
29 CFR 1926.304(i)(1) · Woodworking tools
 Serious$3,410$3,410May 10, 2019Final
Citation 1, item 3
29 CFR 1926.403(b)(2) · Electrical equipment on job sites
 Serious$3,410$3,410May 10, 2019Final
Citation 1, item 4
29 CFR 1926.404(b)(2) · Ground-fault protection on job sites
 Serious$3,410$0May 10, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.403 · Electrical equipment on job sites

29 CFR 1926.403(b)(2)

(2) Installation and use. Listed, labeled, or certified equipment shall be installed and used in accordance with instructions included in the listing, labeling, or certification.

29 CFR 1926.404 · Ground-fault protection on job sites

Other siding contractors employers in Vermont

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.