Imperial Blades, LLC: OSHA inspections and violations
Sun Prairie, Wisconsin · Cutting Tool and Machine Tool Accessory Manufacturing · NAICS 333515
2inspections
3citation items
$12,185current penalties
Feb 23, 2022last inspection
OSHA has inspected Imperial Blades, LLC 2 times in Wisconsin since 2016.
The latest one began on Feb 23, 2022 on a referral, in Sun Prairie.
Those inspections ended with 3 citation items: 2 serious and 1 other-than-serious.
Penalties were first proposed at $19,402 and now stand at $12,185, 37% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Imperial Blades, LLC averages $6,092 (2 cited inspections).
Imperial Blades, LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
223employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
Incident on Feb 15, 2022: Employee amputates finger when caught by welding electrode
At 8:45 a.m. on February 15, 2022, an employee was using a Banner Resistance Welder, Model 1AP-100-A12 and Serial Number 8322, to weld cutting blades together. The employee's fingers were within a few inches of the pinch point. As he depressed the foot pedal in order to lower the electrode, the electrode caught his finger, resulting in a left index finger amputation. The employee was treated without hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Sun Prairie site logged 12 recordable injuries or illnesses among about 153 workers: 6.7 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Imperial Blades
Sun Prairie · 2021
153
12
2
6.7
1.9
Imperial Blades Sun Prairie
Sun Prairie · 2016
80
4
1
6.6
2.3
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Feb 15, 2022, Sun Prairie: Amputation · amputations · fingertip(s)
An employee was operating a spot welder and holding an anchor in place. The machine cycled and amputated the employee's fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.124 · General requirements for dipping and coating operations
29 CFR 1910.124(g)(2)
(2) An emergency shower and eye-wash station close to the dipping or coating operation. In place of this equipment, you may use a water hose that is at least 4 feet (1.22 m) long and at least 3/4 of an inch (18 mm) thick with a quick-opening valve and carrying a pressure of 25 pounds per square inch (1.62 k/cm 2) or less; and
(b) Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.
(4) Guarding. All press welding machine operations, where there is a possibility of the operator's fingers being under the point of operation, shall be effectively guarded by the use of a device such as an electronic eye safety circuit, two hand controls or protection similar to that prescribed for punch press operation, § 1910.217 of this part. All chains, gears, operating bus linkage, and belts shall be protected by adequate guards, in accordance with § 1910.219 of this part.
Other cutting tool and machine tool accessory manufacturing employers in Wisconsin
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.