Innovative Plastech, Inc.: OSHA inspections and violations
Batavia, Illinois · All Other Plastics Product Manufacturing · NAICS 326199
3inspections
13citation items
$15,380current penalties
Apr 11, 2017last inspection
Innovative Plastech, Inc. has 3 OSHA inspections on record in Illinois, the first in 2004.
OSHA's last visit started on Apr 11, 2017 on a referral, in Batavia.
Across those inspections OSHA issued 13 citation items: 12 serious and 1 other-than-serious.
OSHA proposed $26,646 in penalties. After settlements and reviews the total is $15,380, down 42%.
Most often, OSHA cited 1910.147, lockout/tagout (9 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Innovative Plastech, Inc. averages $10,650 over 1 cited inspection in that time.
Innovative Plastech, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
423employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
Incident on Apr 3, 2017: Employee's finger is amputated when caught in machine
At 11:12 p.m. on April 3, 2017, an employee was running regular production operations on the Sencorp thermoforming line no. 12, model no. 2500 that was adjacent to Sencorp thermoforming line no. 13, model no. 2500 that was operated by a coworker. At approximately 11:12 p.m. the employee was watching about 20 to 25 Omron trays being produced and speaking with the coworker at line no. 12 trim press station after the coworker started the initial production run following machine setup. At that time, there was a production-related problem. The employee noticed that plastic sheet material came out of the in-feed chain and bad parts were being produced. The employee and co-worker walked over to the in-feed station and the employee got on a relatively small work platform at the side of the horizontal in-feed table. Plastic sheet opposite the employee buckled and was sagging. The employee reached out to place his right hand on the buckled plastic that was about 4 to 6 inches away from an unguarded pinch point. The employee's right foot slipped off the work platform and the right hand entered the pinch point between the horizontal in-feed pin chain (equipped with vertical spikes for piercing plastic sheets) and the vertical idler wheel at the same time the machine indexed forward. The employee's right hand middle finger was amputated at the first knuckle. The employee walked away from the in-feed station to seek first aid. Co-workers responded. First responders were requested. The employee's amputated fingertip was recovered. The employee was transported by ambulance to local emergency room at Delnor hospital in Geneva, IL, but the fingertip was not reattached. was not reattached.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Batavia site logged 5 recordable injuries or illnesses among about 79 workers: 6.4 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 5 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Innovative Plastech
Batavia · 2018
79
5
2
6.4
2.6
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
On April 3, 2017, an employee was adjusting a roll of plastic material being fed into a thermoforming machine while standing on a small metal grated platform. The employee stumbled and the employee's hand was caught in a pinch point where the machine chain drew the material in, resulting in amputation of the right middle fingertip.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(5)(i)
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.