OSHA SearchOSHA records by employer

Insight Carpentry Inc: OSHA inspections and violations

North Conway, New Hampshire · Other Foundation, Structure, and Building Exterior Contractors · NAICS 238190

1inspections
4citation items
$5,676current penalties
Jun 23, 2025last inspection

OSHA has inspected Insight Carpentry Inc once in New Hampshire.

The inspection began on Jun 23, 2025 as part of a related case, in North Conway; the case is still open.

That inspection ended with 4 citation items: 4 serious.

Penalties were first proposed at $13,620 and now stand at $5,676, 58% lower after settlements or reviews.

Scaffolds, general requirements comes up most often in these citations: 2 items under 1926.451.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Insight Carpentry Inc averages $5,676 (1 cited inspection).

Insight Carpentry Inc: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

New Hampshire · latest 90 days of OSHA records

52employers cited

Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Hampshire

Checking a subcontractor, a client or your own company? Watch Insight Carpentry Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348445859 OPENED JUN 23, 2025Open

Unprogrammed related · Partial · Safety · 9 employees at the site · Open

Black Diamond Road, North Conway, NH 03860 · Other Foundation, Structure, and Building Exterior Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(i)(1) · Woodworking tools
Serious$2,838$2,838Sep 16, 2025Final
Citation 1, item 2a
29 CFR 1926.451(b)(5)(ii) · Scaffolds, general requirements
Serious$2,838$2,838Sep 16, 2025Final
Citation 1, item 2b
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
Serious$3,972$0Sep 16, 2025Final
Citation 1, item 2c
29 CFR 1926.501(b)(13) · Fall protection in construction
Serious$3,972$0Sep 16, 2025Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(b)(5)(ii)

(ii) Each platform greater than 10 feet in length shall not extend over its support more than 18 inches (46 cm), unless it is designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end.

29 CFR 1926.451(g)(1)

(g) Fall protection. (1) Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1) (i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.

29 CFR 1926.501 · Fall protection in construction

Other other foundation, structure, and building exterior contractors employers in New Hampshire

Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.